i just bought a 20 oz paintball co2 tank at cabelas
the urethane o-ring on it seemed dry so i was wondering if it would be safe to put a little rem oil on it to help seal better
oil on o-rings?
-
SEAKING9006
- Corporal 3

- Posts: 734
- Joined: Mon Jun 23, 2008 3:20 pm
- Location: Texas
Use mineral oil.
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon
Current Project: Bolt action rifle (25x140mm + 1in shot)
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon
Current Project: Bolt action rifle (25x140mm + 1in shot)
-
SEAKING9006
- Corporal 3

- Posts: 734
- Joined: Mon Jun 23, 2008 3:20 pm
- Location: Texas
It says on a lot of markers to use mineral oil as a lubricant. Like mine.
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon
Current Project: Bolt action rifle (25x140mm + 1in shot)
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon
Current Project: Bolt action rifle (25x140mm + 1in shot)
Vaseline can do exactly the same to seals, being a petroleum product.pocket wrote:no it will eat the urethane use vasalene it will let it slide on and also improve the life of the o-rings
It's usually unwise to use petroleum oils in a high pressure environment. Now, it's unlikely to be a problem with CO2 (being inert), but it's not a good idea to get into, because you might make the mistake of using it in a pressurized air situation, and it can be dangerous in those cases, given the increased density of oxygen around.
Does that thing kinda look like a big cat to you?
- Daltonultra
- Specialist 3


- Posts: 301
- Joined: Mon Nov 24, 2008 8:17 pm
- Location: Columbus, Ohio, U.S.A.
- Has thanked: 1 time
- Been thanked: 2 times
The big problem with using any possibly flammable oil in a high-pressure app is that sudden increases in pressure can cause it to "diesel".
My Father made the mistake of using regular gun oil in his break-barrel pellet pistol. Every so often, the oil explodes when the spring suddenly pressurizes it, exactly like a diesel motor. The thing kicks like a .45 when that happens.
My Father made the mistake of using regular gun oil in his break-barrel pellet pistol. Every so often, the oil explodes when the spring suddenly pressurizes it, exactly like a diesel motor. The thing kicks like a .45 when that happens.
A pure silicone based lubricant will not harm o-rings of any type.
Silicone Oil: Paslode nail gun oil, $8 a bottle (home depot), great overall lubricant. Thick and sticky.
Silicone Grease: Dielectric Silicone grease, $9 a tube, (automotive stores), great grease.
Silicone Spray: Look for a "Food Grade" silicone spray. Some non-"food grade" silicone sprays will have harmful additives which will break down and deteriorate rubber quickly. Sprays are just a dry lubricant and not really suited for o-rings.
///ed///
Silicone Oil: Paslode nail gun oil, $8 a bottle (home depot), great overall lubricant. Thick and sticky.
Silicone Grease: Dielectric Silicone grease, $9 a tube, (automotive stores), great grease.
Silicone Spray: Look for a "Food Grade" silicone spray. Some non-"food grade" silicone sprays will have harmful additives which will break down and deteriorate rubber quickly. Sprays are just a dry lubricant and not really suited for o-rings.
///ed///
- MaxuS the 2nd
- Corporal 2

- Posts: 674
- Joined: Sat Jan 19, 2008 3:59 pm
Or a Lithium based product.
Badman
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 15 Replies
- 5927 Views
-
Last post by boilingleadbath
-
- 2 Replies
- 1318 Views
-
Last post by Technician1002
-
- 5 Replies
- 1617 Views
-
Last post by frankrede
-
- 3 Replies
- 2213 Views
-
Last post by Novacastrian
-
- 4 Replies
- 1630 Views
-
Last post by WOW!!



