rpg help

[bob-a-lu]

could i hook up a tank to vinyl tubing to a blowgun to make a rpg?

[mike1010]

by vinyl tubing do you mean pvc if so yes but you wouldn't want to use a blo gun the volume released through it is not enough to shoot anything so you need a faster higher volume valve like a modded sprinkler valve, or a qev. How big do you want it to be maybe i could help u draw up plans or someone else for shure. i forgote to mention you need a tank to hold the pressure before you get to the barrel not the tank on the compressor but one witha larger opening. then you could place the whole assembly in a larger diameter pipe and use a football shaped object that has the barrel running through it to make a rocket like object if your going for looks

[turbohacker]

First of all, Mike, learn to use periods.
Your gun would work, however it would have horrible performance if I am understanding it correctly. Could you possibly draw up an idea on paint, that would help alOOOOt

[mike1010]

these r the plans i suck at ms paint and they are not to scale but with these you should be able to make the rpg your looking for i assume its the standard terrorist one not a us bazooka type thing right?


hope this helps if not ignore this post completely

[fretmelter]

so im guessing the middle roundish thing is a sprinkler valve? and the thing on the left is the holding tank?
or maby its the one on the right idk..... and bob-a-lu have u built one of these before if so its the exact same just a with a prettyier outer shell.

[homedepotpro]

mike that would work fine just get the barbed fitting and hose clamps for the hose and 1/2 inch sch 40 fits perfectly inside the openings of those bottles

[mike1010]

the thing to the left is the holding tank the one to the right is a fake rocket for looks. and the plan calls for the use of a blowgun hooked to a 1/4 barbed fitting but half would work better.
EDIT:

so im guessing the middle roundish thing is a sprinkler valve? and the thing on the left is the holding tank?
or maby its the one on the right idk..... and bob-a-lu have u built one of these before if so its the exact same just a with a prettyier outer shell.

its labled modded sprinkler valve on the plan itself as is it labled pressure tank so your question is already answered cant you read?

[spud yeti]

Wow... youre picasso...
Looks good to me though.

[mike1010]

http://www.spudfiles.com/forums/viewtopic.php?t=6448&

look use the search button or just browse...........