Plans for homemade airrifle

[jackssmirkingrevenge]

thats some serious powerfull burst yeah !

easy to achieve, just a normal vortex block BBMG with a small chamber and care taken to keep dead volume from the blowgun to a minimum.

[iknowmy3tables]

you dificulty to understand is now fustrating me have you ever seen an airsoft gun and its inside

[jaffe]

The plan now is to make a valve that's similair to the valve from 'the beast' . The reloading is pump-action 8) . So any qeustions?
Greetings from the Dutch, Jaffe

http://www.spudfiles.com/forums/the-bea ... rt,15.html

[jackssmirkingrevenge]

that took me a lot of epoxy to achieve, good luck

[jaffe]

For what kind of things have you made of epoxy, I can do a lot things with sheet´s and pipe´s of pvc.
Greetings from the Dutch, Jaffe

[spud yeti]

For what kind of things have you made of epoxy, I can do a lot things with sheet´s and pipe´s of pvc.
Greetings from the Dutch, Jaffe

Do you have a lathe and machines to make all the parts?

[jackssmirkingrevenge]

I used epoxy to cast the trigger block and reinforce the piston and trigger housing, the componenets will be under a lot of stress so make sure everything is strong enough - also, make sure there's something to stop the piston from flying into your face

[iknowmy3tables]

thats a single shot gun and a coaxile how the hell is that going to become a pump action, good luck trying to acoplish that,
whatever you'll need to put a spring on the back of he piston to reset it it and put the valve in tee configuration to allow breechloading

[jaffe]

I have already notised that but no problem I only mean reloading the gun.
I don´t have professional machine´s, but I have a dremel with AL the tools included that replaces alot of work, and also I have passage to machine´s every wednesday(electronics club). I just notised that if i use pump-action reloading I can use a magazine .
Greetings from the Dutch, Jaffe