Nail Gun Battery Semi

[TwitchTheAussie]

Awesome Jack and also Random allow me to say this; you scare me .
Thats some brilliant work mate. Keep it up :thumbright:

[Redcoat]

Jack, i have a hunch you come from the "Eastern Bloc" or German areas of Europe am i right?
I also slightly suspect the UK?
sorry i had to bring that up.I like your mysteriousness.

[jackssmirkingrevenge]

It's not that I like being mysterious, it's just that spudguns are of dubious legality here at best so I don't like to attract undue attention to myself.

[MrCrowley]

It shouldn't create suction unless you have a constant flow. The magazine on my Yunker 2 works in exactly the same way.

The problem with batteries is that even if you create a rectangular magazine in which they fit exactly, the fact that they have a raised positive terminal means that air will still flow past it.

But a verticle mag will have suction without a constant flow? I have had this problem with verticle mags and paint balls, there's enough air to create suction and shoot 2-4 PB's from my paintball gun which is just two small FE's(chamber) and a solenoid valve.

[jackssmirkingrevenge]

is the mag made of the same material as the barrel?

[MrCrowley]

Yeah, verticle fed, holds about 6 PB's. It connects to the barrel in a tee, but I feed the barrel through the tee so the PB goes straight into the barrel.

[jackssmirkingrevenge]

is there a stop to allow pressure to build behid the projectile before it leaves the breech?

[MrCrowley]

That would be a negative.
The hole in the barrel where the PB falls into is usually enough to hold it in place if I point the barrel at the ground, so I didn't bother with one.

[jackssmirkingrevenge]

That would be a negative.

There's yer problem