ok this is my new gun spent about a day designing and building it. it shoots 3/4 end caps glued together the barrell is 1 1/4 pvc and the chamber is 1 1/5 pvc. is was a over and under as seen in the first pic but the valve broke so now its an inline. i run it at 200 psi and everything holds great. the end caps are filled with lead pellets. havnt had a chance to shoot it yet. sign down the road says" densely populated area noise ordinance strictly enforced" so i dont wanna chance it it also has a bolt action i built into it out of 1 inch pvc. the tee thats around the bolt was put there after i built the bolt action slots and realized it weakened the pipe so i glued a tee on there and cut all the slots again.
