Nalgene bottle

Because potatoes only last one shot!
Post Reply
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26219
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 582 times
Been thanked: 347 times

A-98 wrote:Image
cool, plus the volume's marked so you can even see how much air you're putting in :D

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
Top
Novacastrian
Staff Sergeant 2
Staff Sergeant 2
Posts: 1603
Joined: Sat Aug 11, 2007 6:59 pm
Been thanked: 1 time

Wombat wrote:Polycarbonate has a tensile strength 9000 pounds per square inch, and can withstand sudden impacts of 5 foot-pounds per inch of thickness. That is why the manufacturers advertise the Bottles as "indestructible." The bottles aren't actually pressure rated though.
What thickness are you referring to?

Edit: Square inch, does this go for burst pressure also?

cool, plus the volume's marked so you can even see how much air you're putting in Very Happy

I just got that :roll:
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
Top
User avatar
SpudUke5
Sergeant
Sergeant
Posts: 1099
Joined: Tue Sep 04, 2007 10:16 pm

ohh, ty. I have never seen one of those b4 :(
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Top
User avatar
psycix
Sergeant Major 4
Sergeant Major 4
Posts: 3684
Joined: Mon Jun 25, 2007 7:12 am
Location: The Netherlands

Maybe test one until it bursts? :)
Top
Novacastrian
Staff Sergeant 2
Staff Sergeant 2
Posts: 1603
Joined: Sat Aug 11, 2007 6:59 pm
Been thanked: 1 time

psycix wrote:Maybe test one until it bursts? :)
Now there is a goood idea :twisted:
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
Top
User avatar
Maniac
Specialist 4
Specialist 4
Posts: 496
Joined: Tue Oct 23, 2007 5:55 pm
Location: Right behind you

yea i was wondering what those were two i have like 5 of them i think i might use one on my nex golfball sniper im designing
Top
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

I would highly advise against using one of those for a pneumatic chamber. I had one that got some nasty stuff crusted in the bottom of it, so I blew it up. I globbed epoxy all over the threads, screwed on the top really tightly, tapped a 20 foot hose into it, and pumped air in from the hose until it blew. It only took about 80 psi and shards flew all over my yard.
It'll work for a basic combustion, but I wouldn't go more high tech than that.
Top
User avatar
BigGrib
Corporal 2
Corporal 2
Posts: 652
Joined: Mon Oct 01, 2007 11:43 pm
Location: TriCities, WA
Contact:
Contact BigGrib

noname wrote:I would highly advise against using one of those for a pneumatic chamber. I had one that got some nasty stuff crusted in the bottom of it, so I blew it up. I globbed epoxy all over the threads, screwed on the top really tightly, tapped a 20 foot hose into it, and pumped air in from the hose until it blew. It only took about 80 psi and shards flew all over my yard.
It'll work for a basic combustion, but I wouldn't go more high tech than that.
Where did you tap in at in the bottle or in the cap??
Yea, that's definitely going to get you at least a tazer.
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>
facebook.com/biggrib
Top
User avatar
psycix
Sergeant Major 4
Sergeant Major 4
Posts: 3684
Joined: Mon Jun 25, 2007 7:12 am
Location: The Netherlands

psycix wrote:Maybe test one until it bursts? :)
noname wrote:I would highly advise against using one of those for a pneumatic chamber. I had one that got some nasty stuff crusted in the bottom of it, so I blew it up. I globbed epoxy all over the threads, screwed on the top really tightly, tapped a 20 foot hose into it, and pumped air in from the hose until it blew. It only took about 80 psi and shards flew all over my yard.
It'll work for a basic combustion, but I wouldn't go more high tech than that.
He did it! :D

Now we know we cant use em until 80PSI (well, actually BELOW 80psi introducing a safety margin)
Top
Rogue
Private 3
Private 3
Posts: 42
Joined: Sat Nov 03, 2007 10:56 pm

lol


yay i get to go and get some pvc glue and pipe at home depot...yayyyyy...lol
Top
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

I filled the cap in about 3/8" with epoxy, and tapped through the top of the cap.
Top
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Ammo & Materials”