The Gepárd SSAMR burst disk UPDATE! DAMAGE PICS!!!

[Zen///]

The Gepárd SSAMR (Single shot anti materiel rifle) burst disk

The SSAMR has a large bore of 15mm classifying it as a destructive device in most countries, the 7mm APDS round is illegal to use against human/living targets, so it is strictly a anti materiel rifle
(The spudfiles treaty http://www.spudfiles.com/forums/rules.html )

It is currently in the testing stage, but reports show the new round is able to penetrate 10cm+ of a phonebook at 5m and still result in damage behind the target.
Accuracy as of yet is fair (A 2” group at 15m [With electrical caps]). Tests at longer ranges have yet to be tried.

The main valve is a burst disk (Clear tape) triggered by a ball valve. There is a .5 to a 2 second delay between actuation of the ball valve and the burst disk triggering.

Remember this is the first “Rifle” ever manufactured by HH///

Updates soon to come as soon as I can get more batteries. (Damage pics, accuracy tests and newly developed ammo.)

Stats:

- Material: Copper barrel/chamber with aluminum chassis
- Valve: Ball valve/Burst disk
- Operating Pressure: 10- 125psi
- Loading: Muzzle/Breech
- Barrel I-D: 15mm
- Barrel Length: 980mm
- Chamber I-D: ¾”
- Operating pressure: 1-300psi (Normal shooting pressure with compressor: 125psi)
Aesthetics: Removable/Adjustable monopod (not shown), Removable/Adjustable stock, SURPRESSOR!!! That doesent work, lol.

Cartridge: 15 mm Special APDS (Armor piercing discarding sabot)
Operation: Single shot, manual loading (Like 95% of all the guns here)
Weight: IDK
Length: 1600mm
Barrel: 980mm
Rifling: smoothbore
Sight: 2X fixed power finder scope with crosshairs
Muzzle velocity: @100psi 400fps with devastator round (AA battery) 800fps with AP round and 1000fps with .25g swarm round (Airsoft 6mm BB)
Max chamber pressure: Ball valve is rated to 600psi, Type M copper.

Manufacturer: HH/// (Hunter heaven///)

Status: Testing


Muzzle view.

Scope and trigger valve.

Breech open

Breech closed

From top: "Ap" round, variation of "pimpin ammo", Electrical cap, AA battery, golf tee, screw darts, 10mm "airsoft" bb's

Surpressor

Surpressor attached

Edit: only 5 spud bux

Edit edit:
And in the words of some guy.
“And yes I am calling it a rifle... though it does not have a rifled barrel. DEAL WITH IT.”

Edit edit edit: I have taken the massive preview out until i can resize it

Edit: Teh whole gun.



UPDATE Jan 17 2008

DAMAGE Pics!!!!!!!!!!!!

15m completely through the target. Scope was low. 10m air rifle target, 10cm wide. 75psi

After penetrating the target, 1 foot behind it is a 1 cm thick wood board. The plastic jacket is stripped off as well as the penetrator cap, the steel core then continues through the board like butter.

Exit hole

Hits the file cabinet


Burst disk that was used

The penetrator core is still usable.

[Pyro Ninja]

NICE....
May I ask if you could put up a picture of the whole gun?....

-you did a really good job-

[Zen///]

Ooops, I thought I had already put the whole gun pic.

It's up now.

[elitesniper]

cool how did you attach the burst disk though? do you just clamp in in the threaded fittings cause i see no union

[POLAND_SPUD]

looks great....

I hope you'll find some high pressure source

[bigbob12345]

Very well done but it is definatly capable of higher pressures.

[daberno123]

Very clean looking gun. How can it take up to 2 seconds to trigger? Are you using just one tank with a ball valve behind the BD or two chambers connected by the ball valve, one set at a higher pressure than the other and the BD set at the average pressure.

[Zen///]

"cool how did you attach the burst disk though? do you just clamp in in the threaded fittings cause i see no union"

It's just one pipe in another pipe held down together by the extension lock on the black aluminum tripod leg.

Very clean looking gun. How can it take up to 2 seconds to trigger? Are you using just one tank with a ball valve behind the BD or two chambers connected by the ball valve, one set at a higher pressure than the other and the BD set at the average pressure.

The burst disk is in front of the ball valve, just actuate the ball valve, aim, and it bursts.

It gives you (luckily) a delay to aim after actuating the ball valve.

[elitesniper]

you have just come in the forums lately didnt you zen? been gone for somtime

[rna_duelers]

Musket is the way of the future .

How well does the suppressor work?Does it have internal baffles?I plan to use make one for my Musket with some 1" copper.

[Zen///]

Ive been studying/ps3'ing.

Warhawk/cod4 is really addictive

How well does the suppressor work?Does it have internal baffles?I plan to use make one for my Musket with some 1" copper.

It's just a cosmetic kind of thing, but works as a "flash" hider, hiding the big compressed air cloud thing that comes out.
It probably doesent even surpress 1 DB.

[elitesniper]

welcome back zen look at my new cannons i made while you were gone ive grown in knowleadge lmao.

[Zen///]

cannon... ...ive grown

in knowleadge lmao.

[benstern]

Suppressor is not big enough.

[Zen///]

Aesthetics: Removable/Adjustable monopod (not shown), Removable/Adjustable stock, SURPRESSOR!!! That doesent work, lol.

Suppressor is not big enough.

It's just a cosmetic kind of thing,

A bang, is more cool than a mouse fart