Cannon wont work

[nabu92]

I just built my 1st pneumatic and every time I fill up the tank to about 80 psi, the air leaks through the sprinkler valve. I bought 2 sprinkler valves, both orbit watermasters. When I use the jar top valve, It can barely shoot anything at 80 psi and air leaks thorugh it. When I use the other valve, It just makes a loud honking noise and shakes while air also goes right through it. I'm using a blowgun to activate the valve, does anyone know whats going on? I'll try to get pics later today.


Here are the pics I hope they help

[jon_89]

is it leaking through the valve or the threads on the valve?

[nabu92]

nope, I feel air coming through the barrel, it completely sealed

[jrrdw]

They are rebeling against you because you posted this in the combustion section. Hardie harharhar! There's a artical about the honking in the Wiki. As for the leaking air, could be the valve facing the wrong way, dirty diaphram, not filling with air fast enough. Good luck.

[jon_89]

this may sound dumb but is the spring in the valve? i had this problem after modding mine because i didnt put the sring back in.

[elitesniper]

is your bleed switch off?

[nabu92]

yeah I tried all of those things, and oops lol didnt mean to post in in combustion, I'm using a coiled yellow hose thats connected to my blow gun, so I'm thinking the hose is too small, I may just directly connect the gun. Off to a party, bbl.

[rna_duelers]

I can tell you right now!Your pilot volume is way to large,and all the air is going out the pilot valve instead of going out the barrel because there isn't a big enough pressure difference to open the diaphragm.Loose the hose between your sprinkler valve and your blowgun and give it a go any bet it will work.

[Isomer]

In the second pic, the little metal rod is a guide rod that will probably have to be plugged. My neighbor bought the same valve and when i examined the solenoid pilot setup, i believe that you have to plug that guide rod for it to work.
My 2 cents

[nabu92]

Ill do that right now, thanks so much

[nabu92]

OMG I LOVE YOU GUYS!!! IT WORKS!!! I sealed the guide rod and lost the hose and it works perfectly now. I had a competition with my friends and my gun shot the farthest! OMG TY SO MUCH!

Pics and vids will be up in a few days

[Hotwired]

ahahahah

Five posts to pick up that there was several metres of hose as the pilot

Good to hear it worked finally, remember to keep pilot volume in mind for the future