First Poly Piston Gun - Black Gold.

[Carlman]

its rated for that high (philmac anyway dunno bout others) but i wouldnt take it that high.

[Mitchza89]

Yeah I reckon 300psi would be good. With the low volume of my pump, it would take a bit of pumping. The only problem I have is the actuating valve.. A sprinker valve would pop at pressures over 200.... hmmmm...

[Carlman]

Yeah I reckon 300psi would be good. With the low volume of my pump, it would take a bit of pumping. The only problem I have is the actuating valve.. A sprinker valve would pop at pressures over 200.... hmmmm...

pn20 metal BV

[Mitchza89]

My thoughts exactly. A 1'' BV with a 3/4'' long bend handle and a custom trigger, like the setup on my whammy guns .

Hmm I might get myself a meter of 3/4'' aluminium tube as the barrel... I don't trust that 300psi spike in pressure that's gonna be running through the pressure pipe. Plus if it's polished, it'll look so so good

[Carlman]

My thoughts exactly. A 1'' BV with a 3/4'' long bend handle and a custom trigger, like the setup on my whammy guns .

Hmm I might get myself a meter of 3/4'' aluminium tube as the barrel... I don't trust that 300psi spike in pressure that's gonna be running through the pressure pipe. Plus if it's polished, it'll look so so good

yea alum is nice aye, i got an old fire eq and with it was a 40cm long alum 15mm pipe with one end threaded i was like shotgun time

[Mitchza89]

That's gonna be a ripper:D. Whens the due date? hahaha

[Carlman]

That's gonna be a ripper:D. Whens the due date? hahaha

hwenever i can find a cheap 20mm QEV

[Mitchza89]

Haha good luck mate. I've tried and failed many times .

[Carlman]

Haha good luck mate. I've tried and failed many times .

well i found a 10$ 3/8" one so time will tell

[Mitchza89]

Hmm this topic should be closed down considering I've got the new one up....Hmm...