Check out this fitting!

[saladtossser]

how about a manifold for a piston valve or a hybrid?

i think you can make a revolving magazine with out of those, like that thing on the tippman a5

[noname]

You would probably be able to do that if you wanted to spend that much time on it. It's only 3.98 but you'd need some kind of thing to spin it.

[spudmonkey]

im thinkin ill probably have to get one, especially at that price

[Atlantis]

That would make this gun perfect!
http://www.spudfiles.com/forums/viewtopic.php?t=1029&

You could build a gun with 6 chambers, and have 6 shots before recharging.

This part is kind of funny too.
http://pvcfittings.com/graphics/manifold1.jpg

[djt]

or get two and make six chambers AND six barrels!

[Jakal444]

You can probably use it with multiple valves and have a multi shot cannon.

[noname]

No you can't because it is just a 7 way fitting. There is no valve or anything to seal 5 of the barrels while 1 is shot or anything like that.

[Atlantis]

He was saying.."WITH multiple valves."

[Velocity]

I dont have any proof... but I am pretty sure that fitting is not pressure rated.

So anything hybrid is basically ruled out, as well as usages on pneumatic and combustion chambers (just to keep it safe)

If it is like sch. 40 (really doesnt matter whether it is dwv, as long as it is used on the barrel), it probably will go down in history as the sickest paintball spudgun accessory ever

well... maybe not

[aperro13]

put 90's on each one and you can shoot shit in 360 degrees at once. HAHA

[Jakal444]

No name I was thinking something like the picture below.

I do think it is pressure rated.

[noname]

I didn't write that. And Atlantis, You could only have a multiple shot with that with muliple valves and barrels; all the barrels are connected

[Jakal444]

This fitting would be used to fill 7 mini chambers, each with a check-valve and ball-valve on it. Why is it not possible?

[frogy]

I would use it for 1 barrel and 7 chambers like Jakal said instead of 7 barrels and 1\ a few chambers...

You could make 7 Tee valves and then have 7 chambers that could be pneumatically controlled to shoot 1 paintball barrel that has a force loader, you could fill all the chambers simultaneously if they were connected and have almost full-auto firing if you could push thet blow guns fast enough

[noname]

Oh, I see. With check valves on one side and a valve on the other side with fittings to a schrader or quick-disconnect on the 1.5" or 2" side. Sorry atlantis, I didn't understand you at first. I'm thinking along the lines of that being a barrel, not 6
chambers and a fill valve.