"In the world of spuds today"

A place for general potato gun questions and discussions.
User avatar
inonickname
First Sergeant 4
First Sergeant 4
Posts: 2606
Joined: Sun Dec 07, 2008 3:27 am

Tue Jul 07, 2009 6:09 am

My bellpro 1/2" QEV got here today :twisted: it will be epic porting to a 5mm barrel. I also picked up a couple of lasers for sights. I've got most of the parts together, I just need to go buy 4 parts tomorrow and devise a breech loading system.

Any ideas for a bolt action system? I'm thinking the entire barrel will move..
PimpAssasinG wrote:no im strong but you are a fat gay mother sucker that gets raped by black man for fun
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Tue Jul 07, 2009 5:05 pm

...Any ideas for a bolt action system? I'm thinking the entire barrel will move..
Maybe a sleeve around the mag./barrel moves...depends on the ammo(?)
(What will it be???)

ITWOST: Been dreaming up a revolver of burst-disk chambers with a trigger activated pump-action (ball detent in barrel, sharp piece on back of ammo, pump action spring...giant NERF design).

Any way, I'm trying to finish an entry for the contest before sep. 1st...

Just too much going on though,
I doubt a .375 bore will win on a cannon forum/cannon page, although I'm not in it to win , just to compete...(to have a goal).

Been designing a series of "How-To's" I plan on posting, to sort of redeem myself in the SF's spud- community here (for all the jerky/ PUI /flaming stuff I've written before)....
Should be interesting.
What's up with you guy's in the ITWOST???
(This is a great thread IMO, Hope to hear more ITWOST's on whatever). 8)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
User avatar
mark.f
Sergeant Major 4
Sergeant Major 4
Eritrea
Posts: 3628
Joined: Sat May 06, 2006 11:18 am
Location: The Big Steezy
Has thanked: 52 times
Been thanked: 53 times
Contact:

Donating Members

Tue Jul 07, 2009 6:14 pm

ITWOST, I delayed my project further by putting others ahead of it. :D (automotive projects are expensive).
User avatar
Carlman
Staff Sergeant 2
Staff Sergeant 2
Posts: 1618
Joined: Sat Nov 24, 2007 1:18 am
Location: Western Australia
Been thanked: 2 times

Tue Jul 07, 2009 6:28 pm

mark.f wrote:ITWOST, I delayed my project further by putting others ahead of it. :D (automotive projects are expensive).
amen, especially when they involve a 3.9 V8 Discovery :roll:
Image
Aussie spudders unite!!
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Wed Jul 08, 2009 12:01 pm

ITWOST: F*CK you all...I am going to look at harley chopper pics online, then go for a ride...then see my girl...
I'll probably just check back from time to time rather than lurking for long periods of time.

It's probably obvious I have stress, I got court in a few days and hopefully won't get locked up...although if I do it ain't nothing...just like a Gov't enforced retardation period of hibernation..until "FREEDOM" again.
BTW*(edIT2: for my stupidity removal/rules)*:evil: :roll: 8)

edit: Hope nobody got too offended by my humor...Cool link for what to do and what NOT to do... Gotta go for now...BTW, (my bike is cooler than anything there).
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
User avatar
mobile chernobyl
Corporal 3
Corporal 3
United States of America
Posts: 756
Joined: Sun Dec 03, 2006 11:53 am
Been thanked: 7 times

Thu Jul 09, 2009 7:27 pm

Bahh, don't remind me of disco's. My D1 with the 4.0 is a nightmare to buy parts for lol.

ITWOSTOWUGNDNTGOUSZZUGUWY, I got another 3/8" qev for my copper rifle, a 1 year old 21 gallon 155psi 6CFM@90psi compressor for $125 off craigslist - SCORE!! the poor fellow found out how much it was worth an hour before I came to pick it up - $400 and they still sell the exact same model at lowes! lol.

10 gallon will now have propper filling power for more rapid shooting lol, whenever that may occur with my stupidly busy summer schedule :(
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Sat Jul 11, 2009 12:23 am

Sounds like a nice find!!!

ITWOST: Been itwost'ing here too frequently, but just an update...:
Got free from my legal issues...WooOO!!!
No witnesses=Acquittal :D
That usually only happens in the movies I heard somewhere.
But apparently it does happen sometimes in real life.
Phew!!! I was getting like an ulcer and they kept me waiting all day.
Dang courts/legal crap give me the creeps.
Well I'm also not drinking so less ulcer still (for now atleast), and more time/money/ mind for spudding is coming. :) 8)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Mon Aug 10, 2009 11:37 am

I'm back from the weekend campout. I had a blast. Due to the number of people present, I didn't get photos of much of the action. When the big baseball game took over the field, I took the opportunity to get some pictures of the location and our target tree.

We took the new launcher and left the ABS cannon home as we didn't have space to take both.

For some reason there were not many apples on the ground this year. Most were smaller than a golf ball and very hard to see fly. We launched water bottles most of the time. After dark we loaded up a bottle of water with a glow stick. It is very impressive after dark. :D Kids loved to retrieve the bottle. Part of the time we launched tennis balls. Some of the older kids were able to field them with a baseball glove.

The tennis balls fell about 50 feet short of the tree. Full water bottles made the best distance. The distance from my car to the tree is 547 feet.

All the testing was completed at 50-60 PSI pressure. Most shots were in this pressure range because that is what the 3 gallon compressor dropped to when filling the 3 gallon cannon. We let the compressor cycle while retrieving the bottle or tennis ball but didn't wait for the compressor to build back up while filling the cannon.

We launched from my car at the lonely tree and landed several bottles into the tree. When we got the range down pat, we unspooled some kite string and tried to launch a bottle over the tree, but in 3 tries, we only landed beside the tree. It is a really small target at distance. We quit when the start of the afternoon baseball game started.

We had more people at camp this year. There were more than 150 present. I didn't get pics of cooking breakfast.. Sorry. I did get a photo of the dinner chow line.

I'm already looking forward to next year.
Attachments
Air cannon in the line of cars.  This is the launch point.  The little compressor ran almost non stop for 2 hours in the afternoon.  The car and inverter handled the load just fine.
Air cannon in the line of cars. This is the launch point. The little compressor ran almost non stop for 2 hours in the afternoon. The car and inverter handled the load just fine.
Dinner Line.  BBQ, Potato Salad, Chips, Watermelon, and more.
Dinner Line. BBQ, Potato Salad, Chips, Watermelon, and more.
Line Toss Setup
Line Toss Setup
My little blue car is there in the line of cars past the baseball game.  Photo is taken in the shade of the target tree.
My little blue car is there in the line of cars past the baseball game. Photo is taken in the shade of the target tree.
The target tree we launched bottles into.  For scale, that's a white car in front of the tree.
The target tree we launched bottles into. For scale, that's a white car in front of the tree.
Last edited by Technician1002 on Mon Aug 10, 2009 11:07 pm, edited 1 time in total.
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Mon Aug 10, 2009 10:43 pm

Looks like fun Tech!!!
ITWOST: I got a beer buz and decided to test a blue painter tape burst-disc on a 1.5" barreled, PVC, sprinkler valved gun...filled with propane and @ about 90 degrees out today, it was too loud for the front yard where I was at (townhouses). :oops:

So (of course) I went out back and smashed some stuff using apple and banana ammo...

Tried out aluminum foil burst-discs also, but it seemed less "blammy" than the painter's tape.
Wanted to try a small bore burst-disc using my tyre filler and 12 gram co2 but I don't have any gauges above 200psi right now.

Been dreaming up a mini-hybrid design...but I've got to finish my pneumatic project first...got issues I don't care to disclose (yet) with my woman and stuff.
As well as work and computer problems that will probably keep me out of the upcoming contest. :(

BTW, excuses are like ... but I do have good ones for now. 8)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Sun Aug 23, 2009 11:35 pm

ITWOST: I was with my lady all day but kept daydreaming of spud stuff. :oops:

I recently saw One Of These on a hose connector...started thinking of the possibilities for a 20 oz. bottle on each.
(They have 4 small ball-valves)
But was disappointed to see it in Home Depot today,
because the ball valve is 1/4" or slightly larger...still maybe a cool component for other uses though. (premixed hybrid, high pressure stuff, etc.) (?).


Been dreaming up a co-axial pneumatic design involving a fire extinguisher body and valve, and a flat thick diaphram rather than piston.

Still haven't finished my main project though (which will get posted eventually). 8)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
User avatar
c11man
Corporal 3
Corporal 3
Posts: 783
Joined: Fri Feb 06, 2009 4:37 pm
Location: Wisconsin, USA

Tue Sep 01, 2009 9:54 am

this talk of extending the contest is GREAT! some of you know why 8)

if only shipping was faster! im gonna go work on my cannon some more, yay.
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Sat Sep 05, 2009 12:51 pm

ITWOST:
Gonna go look for a screwdriver from my tool boxes or a bargain one in proper size from a hardware store.

I am thinking it will be excellent to create a piston from:
They are cheap, come in lots of diameters,

But also, chuck the metal shaft (drill in vise, drill press, lathe, mill, electric fan/ blender motor modified etc.),
And machine it to smoothness and proper diameter if necessary.
edit: (then cut it to length)

Screwdriver handles are strong plastic at decent prices usually... 8)

I wonder what's going on in the world of the contest???
My computer's been acting soo slow,( it's keeping me from a lot lately). :( 8)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
jeepkahn
Corporal 3
Corporal 3
Posts: 747
Joined: Fri Jan 09, 2009 1:11 pm
Location: Triad, NC, USA

Sat Sep 05, 2009 2:20 pm

THUNDERLORD wrote:ITWOST:
Gonna go look for a screwdriver from my tool boxes or a bargain one in proper size from a hardware store.

I am thinking it will be excellent to create a piston from:
They are cheap, come in lots of diameters,

But also, chuck the metal shaft (drill in vise, drill press, lathe, mill, electric fan/ blender motor modified etc.),
And machine it to smoothness and proper diameter if necessary.
edit: (then cut it to length)

Screwdriver handles are strong plastic at decent prices usually... 8)

I wonder what's going on in the world of the contest???
My computer's been acting soo slow,( it's keeping me from a lot lately). :( 8)
That's frikkin' brilliant... I wish I had thought of that, I've got so many screwdrivers with broken/chipped points it ain't even funny, now I've got a source for smaller bore pistons...
My Cannons can be found by clicking the following link.
http://www.spudfiles.com/forums/viewtop ... tml#256896
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Sat Sep 05, 2009 2:38 pm

jeepkahn wrote:
That's frikkin' brilliant... I wish I had thought of that, I've got so many screwdrivers with broken/chipped points it ain't even funny, now I've got a source for smaller bore pistons...
I've considered that, but I went for HDPE for impact resistance, Larger sizes, and Weight. Lighter pistons are faster. Some screwdriver handles are fairly brittle. Select carefully.
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Tue Sep 08, 2009 11:47 pm

ITWOST:
Had a slightly less than 7lb. arrival the other day, sent down straight from Heaven. She's perfect !

Thought about getting some beer on way home, but more than ever thought, "No way, I have my "priorities".
Although riding my Harley home on the 1 hour+ ride (which took 20 minutes on the way)...for some odd reason, This song (not the lyrics, just the tune) was stuck in my head riding in the peaceful rain.

...Yeah, I cried, a few tears rolled out seeing her...my lady thinks it's hillarious and told everyone...Took a knee in private and bowed my head afterwards too.
Well, I gotta go for now, although I'm certain spudding stuff will remain a different priority. 8)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
Post Reply