valve Help

[spudfile]

Is there a way i can use a 1in.orbit valve on my cannon without modding it

[carlbelcher]

Yes, all you have to do is connect a battery(s) (9-24 volts) to the two leads on the solenoid.

If you modify it your gun will shoot a lot better.

[spudfile]

dang that is the quickest reply i have ever seen thank you

[Benny]

use 3 9 volt batteries.
but modding it increases the power, like 10 times.

[carlbelcher]

You don't need to use 3 9 volts even 1 will work, I used just 1 before I modified my valve.

[L.J.R]

If you were to use AC power "power point" you need 24v, If using a battery "DC power" you really only need one 9v battery.

[Vb_happiness]

All I did was mod a flow control solenoid and leave the solenoid itself in and just cut the wires and screw a 1/4" brass nipple in to go to my dust blower.