Gun Freak's Co-Ax Done... Again -L-

Cannons powered by pneumatic pressure (compressed gas) using a valve or other release.
Post Reply
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

I have rebuilt my new co-ax because the piston was not sealing the barrel or my support was creating a leak. For whatever reason it wasn't working... I'm glad I rebuilt it. I added a cool fill station with a quick connect and a 1/4" ball valve so I can connect it to the big compressor and get as many shots as I want, and rapidly also. So here's some pics of the parts and the assembled gun:

Piston-
Image

Chamber, barrel, and support (hard to see)-
Image

Filling station with quick connect and ball valve, also a schrader on the other end-
Image

Rear assembly (for those of you who saw my first post... I swapped out the 2" nipple holding the pistol grip with a close nipple... Looks slightly better :) )-
Image

Down the assembled cannon-
Image

Whole gun-
Image

I know it may look a little unpleasing to the eye... but a paint job is comming before this weekend. I hope to have damage vids and pics then also. Green tiger paint job btw! :D

Hope you all like it! :hello1:



~~~~~UPDATE!!!!~~~~~
Here's the well waited for damage pic... I only took one. It should be plenty... :twisted:

Thats a Speed Limit 30 sign. And through it- a home made nail dart. It went clean through the sign and left a sweet hole.
Image
Yep I'm happy :wav:
Last edited by Gun Freak on Wed Feb 10, 2010 5:06 pm, edited 1 time in total.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
Top
User avatar
reedfe
Private 4
Private 4
Posts: 78
Joined: Wed Feb 03, 2010 9:00 pm

looking good btw
Top
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Thanks stranger :munky2:
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
Top
User avatar
deathbyDWV
Corporal
Corporal
Posts: 576
Joined: Sat May 16, 2009 4:02 pm
Location: Owasso, OK

Good to see it finally working! Actually... Is it working? You didn't say anything about whether it's sealing now or if you've tested it.

I'll be waiting for some damage pics...
Life's too short to mark off the items on your wish list...
Top
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

I like the new fill station. Cool setup.
Top
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Thanks Mr. C :)
DWV I took pics right after I finished gluing so I don't know if it works or how well.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
Top
User avatar
deathbyDWV
Corporal
Corporal
Posts: 576
Joined: Sat May 16, 2009 4:02 pm
Location: Owasso, OK

Oh ok... Do you have a way to service the piston now?

Edit... BTW... I like how it looks now with the stock and the trigger closer to the valve.
Life's too short to mark off the items on your wish list...
Top
User avatar
Patto
Private 4
Private 4
Posts: 96
Joined: Wed Jan 20, 2010 7:08 pm

I like the trigger set up G.F ... very cool 8)

let us know how the damage shoots go !!
Top
User avatar
psycix
Sergeant Major 4
Sergeant Major 4
Posts: 3684
Joined: Mon Jun 25, 2007 7:12 am
Location: The Netherlands

The gun looks good, but what the hell is that soft material around your piston?
Till the day I'm dieing, I'll keep them spuddies flying, 'cause I can!

Spudfiles steam group, join!
Top
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Its batting from a quilt.

and DWV no I can't access the piston :(
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
Top
User avatar
Crna Legija
First Sergeant 2
First Sergeant 2
Posts: 2333
Joined: Sun Jul 20, 2008 5:14 am
Location: australia

nice gun looks good hope it works out this time

lol why did you put batting on the piston?
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson

Add me on ps3: wannafuk, 8/11/11 cant wait
Top
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

The batting was to make it fit tighter.

EDIT- Damage pic at bottom of first post now :D
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
Top
User avatar
reedfe
Private 4
Private 4
Posts: 78
Joined: Wed Feb 03, 2010 9:00 pm

Looking good :D mines gonna b better lol. I'll have it done by tomrrow hopefully. Then I'll paint it. Mines gOnna put a hole through a speed limit 50 sign and a stop sign together!!! Lol. I wish
Top
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Yeah, you do. Dude it went clean through that sign!!! :D
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
Top
User avatar
reedfe
Private 4
Private 4
Posts: 78
Joined: Wed Feb 03, 2010 9:00 pm

I gotta come ova
Top
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Pneumatic Cannons”