Large O-rings

[clemsonguy1125]

Ok, thanks I'll have to see if I have a local tru value

[dewey-1]

@Tech

What are the dimensions of the 2.5" O-Ring being used?
Need to update my CAD file for your launcher.

[Technician1002]

@Tech

What are the dimensions of the 2.5" O-Ring being used?
Need to update my CAD file for your launcher.

I am not sure at the moment. I'll find out later. I just took a cut piece of pipe to the store and found some that fit. I'll see if I can get a bin number on that ring.

[clemsonguy1125]

UNfortuantly I don't have a local true value so I'll have to find somewhere else

[Technician1002]

I found the ring package. The o rings in the 2.5 inch QDV are part number 2-330. They are 2-1/2 inches OD, 2-1/4 ID, with a CS of 3/16ths of an inch. They just fit inside the pipe with minimal compression.

[dewey-1]

I found the ring package. The o rings in the 2.5 inch QDV are part number 2-330. They are 2-1/2 inches OD, 2-1/4 ID, with a CS of 3/16ths of an inch. The just fit inside the pipe with minimal compression.

That is the size I actually already used on the drawing!
Thanks for verifying that number for me.