the whisper 6mm niceeeee

Cannons powered by pneumatic pressure (compressed gas) using a valve or other release.
sscustoms
Private
Private
Posts: 8
Joined: Thu Jun 10, 2010 11:12 pm

hi all you air gun lovers im back with my 2nd gun mad its pretty much goes back to my other gun that i made when i was 14 and it worked great had no problemssimple ball vavle 1 shot so yeah thats it
so heres the gun video at the bottom
Image


Image


[youtube][/youtube]

[youtube][/youtube]

[youtube][/youtube]
Last edited by sscustoms on Tue Jul 13, 2010 4:13 am, edited 1 time in total.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26219
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 582 times
Been thanked: 348 times

For small calibres, you should consider using higher pressures. The ball valve is perfect for dealing with these pressures, all you'd have to do is make sure that your chamber and fill valve can take the strain. With a schrader valve and a relatively cheap shock pump, you can go to 300-400 psi in a small chamber in less than a minute, and you really will see the difference.

Also, not sure if the "suppressor" is functional, but remember, there's no substitute for cubic capacity when it comes to effectiveness ;)
hectmarr wrote:You have to make many weapons, because this field is long and short life
sscustoms
Private
Private
Posts: 8
Joined: Thu Jun 10, 2010 11:12 pm

jackssmirkingrevenge wrote:For small calibres, you should consider using higher pressures. The ball valve is perfect for dealing with these pressures, all you'd have to do is make sure that your chamber and fill valve can take the strain. With a schrader valve and a relatively cheap shock pump, you can go to 300-400 psi in a small chamber in less than a minute, and you really will see the difference.

Also, not sure if the "suppressor" is functional, but remember, there's no substitute for cubic capacity when it comes to effectiveness ;)


hey thanks man yeah still gotta make a air tank for it so i can connect to the back
User avatar
Lockednloaded
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1566
Joined: Thu Sep 03, 2009 9:38 pm
Location: Texas, USA
Been thanked: 7 times

how does your trigger mech/ spring catch work, kinda hard too see
I love lamp
sscustoms
Private
Private
Posts: 8
Joined: Thu Jun 10, 2010 11:12 pm

Lockednloaded wrote:how does your trigger mech/ spring catch work, kinda hard too see
hi yeah its just a simple spring loaded ball vavle with a latche you pull the latch like on a real gun with releases the spring which pulls down the ball vavle pretty simple work good too
User avatar
Stolly32123
Private 3
Private 3
Posts: 50
Joined: Sun Jul 04, 2010 7:50 am
Location: Australia

Looks great. can i asked what you used for the barrel?
sscustoms
Private
Private
Posts: 8
Joined: Thu Jun 10, 2010 11:12 pm

Stolly32123 wrote:Looks great. can i asked what you used for the barrel?
hi thanks 4 the comment and yeah its a 10mm aluminium barrle
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in