Anyway, here are the specs.
Chamber: 11" of 3/4" pvc.
Barrel: 3' 6.35mm aluminum
Detent: 2 o-rings max, although most of the time I will probably only use one because it is really tight. I don't even know if the bb will be able to make it through.
![Confused :?](./images/smilies/icon_e_confused.png)
Valve: 1/4" ball valve on my FE tank for testing. May add a new valve in final version.
Running pressure: Will depend on pop pressure of detent, but anywhere up to 180 psi.
QD in rear of chamber for connection to air supply.
Pictures:
Tank
![Image](http://i979.photobucket.com/albums/ae277/lvspiano/SAM_1239.jpg)
With barrel
![Image](http://i979.photobucket.com/albums/ae277/lvspiano/SAM_1240.jpg)
With tank
![Image](http://i979.photobucket.com/albums/ae277/lvspiano/SAM_1241.jpg)
Barrel assy
![Image](http://i979.photobucket.com/albums/ae277/lvspiano/SAM_1237.jpg)
Detent seat
![Image](http://i979.photobucket.com/albums/ae277/lvspiano/SAM_1238.jpg)
With o-ring
![Image](http://i979.photobucket.com/albums/ae277/lvspiano/SAM_1243.jpg)
BB with detents.
![Image](http://i979.photobucket.com/albums/ae277/lvspiano/SAM_1242.jpg)
Sorry about blurry close ups, macro wasn't cooperating
![Razz :P](./images/smilies/icon_razz.png)
Suggestions are appreciated, this is a WIP.
:occasion5: