A valve rated for 150 psi won't explode at 151 psi, while exceeding pressure ratings is not recommended there is a certain safety factor which some people choose to slim down, people have used typical QEVs to 500 psi and beyond without failure to my knowledge.Butch902 wrote:isn't the max psi rating for a 3/4'' QEV 150- 175max?
hectmarr wrote:You have to make many weapons, because this field is long and short life
Still worthy of being posted here *hint hint*Dave_424 wrote:building PCP airguns with operating pressures of 200-250 bar
hectmarr wrote:You have to make many weapons, because this field is long and short life
Gipetto's work here is quite impressive, there are several other PCPs on the site but most of them are modded commercial items.Zeus wrote:I don't think I've seen mention of homemade PCPs here, let alone seen a built one.
hectmarr wrote:You have to make many weapons, because this field is long and short life
If Dave is in the UK and "nifty" means 12.01 ft/lbs +, I would understand his reasons for not posting.Gippeto wrote:Dave's doing some rather "nifty" stuff with the Stealth.
Post it up Dave...
hectmarr wrote:You have to make many weapons, because this field is long and short life
You need to be a member in order to post a reply
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
