What are optimum parts for QEV's?

[Gun Freak]

I don't know if there are any actual tutorials on making a co-ax... but that is different than a QEV... What do you want to do? Buy a QEV or make a piston valve?

[warhead052]

If I can buy QEV's where would I find them? Other wise I know how to make piston valves, but I kinda don't want to unless I have to.

[Crna Legija]

you can try this place or ebay quick exhaust valve.

[Gun Freak]

You'll have a lot of fun just getting a QEV, putting a metal chamber on it and cranking it up to like 500 psi. Easy to build too.

[warhead052]

Ok, well let me know if I can get one from some where like Lowes or Home Depot. Also, I have a friend who has a broken paintball gun, should I try and salvage the trigger system for the qev from the paintball gun? Or just build my own?

[Crna Legija]

afaik you cant get them from home depo or lowes, but not from the us.
you cant make your own read this. idk if your mates pb gun is a autococker you might be able to get a 3way valve from it and make your gun semi auto.

[Major Collins]

i recommend brass , lots of fitting and good for your average pneumatic ,also in the long run lots of choices

[warhead052]

Ok, @-_- I will check and see what type it is, I just need a valve and trigger mechanism.

[warhead052]

I think I have decided what I will do, but I will need to figure out a chamber system and stuff. I will use a T with a piston inside it, and I will figure out a chamber and air tank storage place, then have a barrel about 24 inches long with a blow gun trigger.

[warhead052]

Just to let you guys know, I should be getting a set of 200 different compression and extension springs, so I will be getting to work on a piston very soon! Let the fun commence.

[Crna Legija]

come on man use the edit button, top right hand corner of your post.

[warhead052]

Ah ok, new to the forum.....