Hands up who has a dedicated spud-bbmg lab

[evilvet]

Aside from JSR that is, deep in the epoxy batcave somewhere under a volcano

The old workshop got flooded on a regular basis, 100mm lower than the driveway for some stupid reason.

Anyhow after a weeks work I now have an elevated insulated floor (no more aches from standing on cold concrete at midnight) some decent storage areas that are going to take most of winter to sort and organise, a dedicated CNC/CAD workstation and best of all a great big island bench with great light and everything handy.

Public thanks to my SWMBO for her support and encouragement, I think she wants me out of the house more for some reason.

Anyone else care to share / brag ?

[jackssmirkingrevenge]

Very nice! Love the big screen, it looks like you're preparing to have the typical evil villain conference with the United Nations where you demand 10 million dollars

Anyone else care to share / brag ?

here

[evilvet]

The TV tuner in the screen died so it got relegated to duty as a CAD monitor.
With my eyesight having a 42" screen to run the PC is a bonus.

The only thing I need right now is a decent drill/mill to replace the current drill press, something like a Sieg X2 would be wonderful.

[jackssmirkingrevenge]

Hehe just like that! I was using the Cartman standard

[warhead052]

Very nice! Love the big screen, it looks like you're preparing to have the typical evil villain conference with the United Nations where you demand 10 million dollars

Anyone else care to share / brag ?

here

Plus the cartman standard, I think you have just gone crazy.. Evil, I like that work shop, now if only I had the time and patience to learn cad...

[evilvet]

now if only I had the time and patience to learn cad...

Don't wait, dive in.

If you are going to get into CAD/CAM try CamBam. It runs as freeware to do most things and is dirt cheap to licence if you want the full suite.

I had never used a CAD/CAM package before and have no training in it. After about a month I could produce just about anything I wanted in simple shapes and profiles.

[warhead052]

Ok, well I will try. I never have any patience for anything like that, I need prebuilt models and a snap together or something....

[velocity3x]

Anyone else care to share / brag ?

Here's mine. Much like JSR named his the "Epoxy Cave", I named mine too.....the "Titty Bar". My wife just laughs when I tell her where I'm going.

[jackssmirkingrevenge]

Are you hiring

We have an epoxy floor at work too, I still grin when I walk around the plant

[evilvet]

Great, now I have shed envy and workshop performance anxiety

[SP00K]

My friend owns an excavator and our summer plan is to build a "fallout shelter" which will ultimately be an underground mancave. We've got our permits and 95% of the necessary building materials. The only problem that has come up so far is how we are going to run electricity out to it. My much prefered location crosses the driveway, a deep ditch, already existing electric lines and a drainage pipe.

It's going to be 20 feet wide by 25 feet long and we are planning on concealing the door with a decorative out house.

[velocity3x]

My much prefered location crosses the driveway, a deep ditch, already existing electric lines and a drainage pipe.

Excavate the trench up to the driveway on both side. Take a larger conduit (sleave) than required by the electric co. for the primary cable conduit. Attach a fire hose to it and push (jet) it under the driveway to the other side. Remove the hose and slide the primary cable conduit through the sleave.....it's done. You can do the same thing where you're going to cross existing utilities.

[Technician1002]

Hire a horizontal boring machine & operator for putting in the underground utilities. May as well pull in phone and Internet at the same time you pull power. They are fast and save a lot of digging. I was amazed at how close they can be steered underground.

[dewey-1]

The TV tuner in the screen died so it got relegated to duty as a CAD monitor.
With my eyesight having a 42" screen to run the PC is a bonus.

Speaking of CAD monitors, I use my Sony 46 inch for CAD via HDMI as well as the home entertainment system monitor.

Also works great for PC games like flight sims and Call of Duty series.

Here is an example using LeMaudit's MiniBoy and a preliminary discarding sabot for MrCrowley's launcher.

[Davidvaini]

If it was me and I was building a workshop, I would have those rubber panels for the floor, that way you can stand for hours and be much more comfortable than pretty much any surface you are on...

It would also help with sound too which is a plus when you have a wife or neighbors.