Gas Sampling Cylinder Paintball Rifle

[rna_duelers]

You no what tetsuo315, im so impressed with that gun and i have alot of spud bux lying around(well i have a small amount compared to some)...so here have about.... 300 and buy yourself a nice signature. And hurry up on the new pics! Must see really cool gun the 2nd.!!!

[Tetsuo315]

Ok GGDT Was pretty close with this gun. GGDT quoted the FPS @ 812. I Chronographed an average velocity of 785-793 FPS. Now thats more like it. Although 800 FPS would be nice. I will need to get the chamber to a higher pressure.

[Bluetooth]

Im with demon, ive never build a combustion (unless you count a pill bottle and a pen tube).

[MrCrowley]

how good do the PBs fit in your barrel as theyre .68cal and your barrel is 3/4"

[Tetsuo315]

Yes they fit the barrel. I use 3/4" CPVC.

[MrCrowley]

whats the I.D of 3/4" CPVC?

[singularity]

.72 i think

and now to add more words....

[MrCrowley]

ok so a PB has a 1.2mm or .04" gap

[noname]

That puts 1/2" SDR 13.5 at a better fit with .69 ID doesn't it now?

[SpudStuff]

sleve inside 3/4" sdr 35

[schmanman]

Is it possible to machene an adaptor with the correct threads for a actual paint ball gun aftermarket barrel on one side,and,say, 1 inch or 3/4 inch NPT threads on the other?

[MrCrowley]

paintball barrels cost $80 here,but i spose it would work, you can get hand held pipe threaders as well.i was thinking about using a proper PB barrel but as i said before its $80NZD for 12"

[noname]

This guy who owns a machine shop saw my guns and said I could go in and weld steel cannons for free and stuff, I'll bring in my paintball gun barrel and see about machining threads for a paintball gun on PVC.

[schmanman]

yeah, that would be cool. screw cpvc, right !

[noname]

38 inches is the longest piece of SDR 13.5 I could get without it bending, so guess how long my paintball gun barrel will be if I can put threads on.