Knife Thread

[Crna Legija]

Can't wait for you to finish it!

As there's epoxy involved you'll have to wait at least 24 hours to see it in action, but here's the whole thing in the meantime, obviously needs finishing.

Already looks better then my one cant wait for damage, how heavy is the blade part? With the plastic back it should be quite front heavy and hopefully make it fly straight.

When you do shoot it keep the pressure low and build up, the recoil is really bad at 300psi I need to hand to hold onto the thing.

[jackssmirkingrevenge]

This is quite small scale, I'm not expecting much recoil. Here's all the data in a GGDT model:

[Crna Legija]

Yeah that lots smaller then my one, chamber is 19mm ID, 90mm long and the blade is 100ish grams IIRC, never GGDTed my before ill give it a shot now.

[Fnord]

For the lulz I think I should post JSR's video before JSR does.

[youtube][/youtube]

[jackssmirkingrevenge]

LOL!

JSR is just taking a bit too long with the showcase thread

[dewey-1]

JSR is probably designing a less lethal device such as a phallus projectile for his next trip to Russia.

[jackssmirkingrevenge]

JSR is probably designing a less lethal device such as a phallus projectile for his next trip to Russia.

JSR has this year discovered he prefers to lavish his disposable income on machine tools than voyages to the motherland I think I'm growing up! Or not

[jakethebeast]

jsr, that is awesome! if it would have little longer, dagger style blade, that has been heat treated springy, that would be deadly, and you would get little more fps with lighter blade

[jackssmirkingrevenge]

jsr, that is awesome!

cheers more in the showcase...

if it would have little longer, dagger style blade, that has been heat treated springy, that would be deadly, and you would get little more fps with lighter blade

Are you suggesting a joint effort

[jakethebeast]

mayby could you give me the measurements and weight of the blade?


EDIT: BTW i would be very pleased if someone would like to buy a blade from me, i have only one order right now.... im gonna be bored soon

[urgle the danish cow]

my man sized ballistic knife will be up next week. i made the main parts in the spring but my machine shop closes for the summer so ill do the final touches on wednesday

[jackssmirkingrevenge]

mayby could you give me the measurements and weight of the blade?

If we're going to collaborate I'll start from scratch, this was just a rough prototype how much would a 5 inch or so version of this blade set me back?

[inonickname]

mayby could you give me the measurements and weight of the blade?

If we're going to collaborate I'll start from scratch, this was just a rough prototype how much would a 5 inch or so version of this blade set me back?

The Fairbairn Sykes...what a surprise for you to choose that by the way if you have one of those FS knives made request a thicker tang, that 1/8" piece of steel is as I understand, a notorious weak spot.

Edit: Screw you guys, I'm gonna go find a spring

[jakethebeast]

jsr, thats hard to say... let me make one forst, then lets talk i should have time today, or tomorrow

[jackssmirkingrevenge]

if you have one of those FS knives made request a thicker tang, that 1/8" piece of steel is as I understand, a notorious weak spot.

If made to be fired, a long tang is unnecessary really.

Screw you guys, I'm gonna go find a spring

Noooo, pneumatics are so much better!

jsr, thats hard to say... let me make one first, then lets talk i should have time today, or tomorrow

Let me know