"In the world of spuds today"

[jackssmirkingrevenge]

Ooh, very nice! That red one is begging for some cool, innovative, feature like what I suggested earlier. Or do you want to keep it as real looking as possible?

I just ordered some D cells, think I'm going to keep the red one as a torch - it's in really good nick, not a scratch on it.

I had been thinking about some schrader trigger that allows filling and firing without adding/removing any bits. Something like that could be needed to justify the price. However, I wouldn't want to use anything too complicated or expensive. Good excuse to f*ck 'round in the garage this arvo

There is an obvious solution:

[jackssmirkingrevenge]

Image hosting problem seems to be sorted, cheers PCGUY!

[jrrdw]

Are those Mag Lights 4 cell?

[jackssmirkingrevenge]

2 x D cell. The red one will continue dispensing photons, the black one will be dispensing lead... still trying to decide in what configuration though.

Large calibre single shot, 0.177" burst fire, 0.177" or 0.22" multi-barrel shotgun, silent dart gun... too many options to choose from!

[Labtecpower]

working on a ball mill








DC motor from an old MIG-welder, power transfer to the drum by a rotex coupling. Made for use in explosive atmospheres, so I should be set
The drum itself is all 316L stainless, 134 MM ID.
The cap is black POM.

I need to find a good power source for this one, at 12 volts the speeds is <60 RPM.

[jackssmirkingrevenge]

Given your location, what will this be used for... herbs that can pass through very toight holes

[Labtecpower]

Nope, stopped using herbs about a year ago

This will be used for producing some magic gas producing powders

[matti]

ITWOST I have piston hybrid... its 50kg of steel Sorry, but no pics yet.

Piston diameter is 110mm (port=90mm), piston made from aluminium and 316ss M20 threaded rod.. it has sliding bearings made from bronze.
Chamber is about 5litres and its designed to take safely 200bar pressures. Chamber design is similar to hydraulic cylinders and chamber is made out of D160mm hydraulic cylinder pipe.
Im staying under 10X mixes.

Its designed for special testing purposes, so it has little different piston setup, its like toolies style pistonvalve.. I get very good flow with that valve.
( http://www.spudfiles.com/spud_wiki/inde ... ston_Valve )

I start testing it now and hope to get some results in few days. I did tests with air and it worked very well


There is lot to it, so I will some day post the pics and all the info about it. If anybody really interested about pics then send me PM

[jackssmirkingrevenge]

This will be used for producing some magic gas producing powders

Presumably not impact sensitive...

matti, come on, you cannot post specs like that and not accompany them with at least one picture or video!

[Labtecpower]

Nah, just some AP

Agreed with the above, pics are needed hehe

[Lockednloaded]

ITWOST: they say its just screwing around until you record data, but now it's science!

50$ shipped!

[jackssmirkingrevenge]

Can't believe you've been in the hobby so long without one

Word of advice, that cable ribbon is very, very easy to nick with a projectile...

[MrCrowley]

Word of advice, that cable ribbon is very, very easy to nick with a projectile...

...and is a b|tch to resolder on the LCD display

[jackssmirkingrevenge]

There are only two types of chrony owners:

1. Those who have shot their chrony
2. Those who will shoot their chrony.

Show it these pictures before a shooting session in order to encourage it to jump out of the way

[Lockednloaded]

This will be used for producing some magic gas producing powders

Presumably not impact sensitive...

matti, come on, you cannot post specs like that and not accompany them with at least one picture or video!

It should be more accurate than my previous methods--

"That shot sounded kind of better than the last one!"