remote air chamber

[golfball_shooter]

I recently purchased a golfball launcher. After doing more research, I have decided to make one of my own design. A couple of questions quickly come to mind in my thought process...
I would like to have the air chamber connected to the launcher using a high pressure hose. Is there any reason this should be a significant effciency issue if the hose is the same inside diameter as the air chamber/valve/barrel fittings?

[jrrdw]

Just avoid dead space in between the golf ball and valve and it should be fine.

Welcome to Spudfiles.

[jackssmirkingrevenge]

Is there any reason this should be a significant efficiency issue if the hose is the same inside diameter as the air chamber/valve/barrel fittings?

In most circumstances a long thin pipe as a chamber would likely give you less velocity as opposed to a short fat one given the same volume, though this difference would not be a significant one in practical terms.

[golfball_shooter]

Thanks for the welcome, hope to contribute myself someday...

Both responses made logical sense to me, just wanted to be sure logic fit application

thanks