Fuel mixer

[saladtossser]

has this been done before?
<img src="http://saladtossser.mypicgallery.com/Co ... _large.jpg">
the mixer is a 1.5" pipe with fan blade like tin sheets cut from a can. it is designed to trave up and down a 2" chamber when u tilt it, as the "blade" moves, it mixes the fuel and air in it. i also thought about attaching a Chambah-Chain on it.

[sergeantspud2]

what is all the other stuff around it

[saladtossser]

a propane meter(first time threading) and a vaccum fan, thats what a 12v motor look like

[sergeantspud2]

so what do the other things do?

[saladtossser]

the vacum vents a gun and the meter measures propane and injects gas into the gun

[sergeantspud2]

i like the idea of the mixer except what about the spark electrodes it will run into those and not get the whole chamber

[saladtossser]

my gun is of an over-under design, so the mixer will be on the other end of the chamber when it fires