what have people come to! (sorry pimp)

[schmanman]

wow, look at this! holy F***ing wow!

a little full of ourselves, eh?

Mad? No. Irritated by your ignorance and stupidity? Yes.

My 3 guns are all far above average, with yours falling significantly below average. I fail to see why you believe they suck. My money is on the fact that you simply have nothing else that could possibly be used against me in an argument, so you turn to basisless insults that have no supporting evidence. I use high quality parts, precision tolerances, and care when assembling my launchers, while you use unsafe parts and construction methods. Care to respond to this point with something constructive, rather than the same repetitive bullshit that you have been giving me?

You wouldnt beable to hit me with your Tippmann before I blasted a hole right through your mask and tore open your face with one 100psi shot (720fps) from my gun. I would have lots of time to wait for an oppurtunity aswell, because it will hold 100% of its pressure for at least 5 hours (I havent tested it for longer).

Average is relative, and the fact is, my paintball gun is far above that. It is basic, but so are your creations. I just put more effort and skill into the construction, making my paintball gun far superior to your crap.

You could out build me any day? Please stop with these type of comments, your hurting my abdominal muscles (from laughing so hard).

[BC Pneumatics]

Someone needs an ego check- could I get a link to this thread?

[schmanman]

It's not a thread... it's some pm's between a friend and spudblass...

I mean, spudblaster.

there are more.

[dippydodo03]

I t is not a thread. I tis what SpudBlaster15 sent me after the "marbles" problem.

Someone needs a huge.

[schmanman]

There you go again, stating claims that have no basis, and completely ingoring my statements. How many times have I stated this? Not enough for your mind to comprehend apparantly. I am sick of arguing with you, you are exactly like all the other arrogant morons I have delt with throughout the years. If you want to stop making an idiot of yourself, learn to argue intelligently, and stop simply throwing around insults. You ran out of things to say to me long ago, and as a result, I cannot adequetly respond to your blabber.

The barrel remains straight, and I can hit the handle of a hockey stick from 50 feet. A paintball would penetrate the mask easily, and leave a bloody welt on your face at the very least. You have no idea how much power a launcher is capable of making. If you did actually work for a pneumatics company, you probably would.

Here is a picture of my "piece of crap gun that came out of a dogs asshole"

http://img.photobucket.com/albums/v627/ ... G_1071.jpg

Not a single wrap of duct tape or drop of epoxy on it, and it sure kicks the crap out of your piece of crap launchers.

he sent me this. he keeps saying the same thing. this guy is total

If it is not about the guns, then why did you draw me in to a conversation involving them with your comparison of yours to mine? If you dont want to change the subject of discussion, then dont do it yourself, dumbass.

I may seem like a dick, but only to the idiots and morons who post things worthy of flaming. If you find me ignorant, then you obviously fit into this criterium. The only reason you find it difficult to communicate/get along with me is because you have not experienced my views from the point of view of someone who shows intelligent initiative.

My paintball gun will outshoot your Tippmann by a velocity factor of 2, and probably cost a fraction of the price.

Thats right, ignore the entirety of my post, and instead attempt to summarize my comments with a single sentence that describes none of them. I hate idiots.

I do carry out the actions that you describe, but not with the basis that you seem to assume. I do in fact tell people that they are idiots because they ask stupid questions, but 99% of the time, they are in fact idiots, and deserve to be flamed, as it is often the only means of preveting them from carrying out stupid actions. You are a great example of this.

Your last comment literally had me rolling on the floor laughing. Lets compare your "guns" to my pneumatic.

My paintball gun:
- Made with NSF-pw pipe and fittings
- Pneumatically actuated sprinkler valve
- Oring sealed aluminum sliding breech
- Gauge and schrader valve threaded through double thickness
- Gloss black paint job

Your ball valve gun:
- Made from DWV fittings
- Crappy ball valve
- Ugly ass primer stains covering the whole thing
- Ghetto breech load system
- Gauge and schrader valve threaded through single thickness

Your sprinkler valve gun:
- Made from DWV fittings
- Electric actuation of the valve (poor performance)
- Ugly ass primer stains covering the whole thing
- A freakin cleanout plug

Obviously, my pneumatic gun is far superior to both of yours. You can try all you want, but you cant win.

[dippydodo03]

Someone needs a realality check.

[schmanman]

I would say so.

[PCGUY]

dippydodo03 and schmanman and spudblaster15 all best stop being little babies over PM or I will ban all 3 of you.

You want to criticize someones work fine, but don't turn it into a huge argument. At least have some heart about it.

[CS]

As I did not take time to read beyond the first paragraph, I will say that this was affair on a personal level. In which way can you infer that this website as a whole is suffering, when you refer to a issue contained in a private message? I can only think of a few people even 'qualified' to deem the status of the forums, so don't go out on a limb here.

'qualified' - You have been a member over 3+ months.
- You contribute
- Your over 13, and confined your OCD's of 'omgz' 'haxorz'. Also that you have better grammar/ spelling then a 'no-looky' text message.

[SpudBlaster15]

My repetitive attempts at reasoning with this Dippydodo03 idiot have failed, as he is still the incompetent fool he was at the beginning of the discussion. There are just some people out there who ignore everything you say, only to throw around petty insults, further proving their stupidity.

Perhaps people should know what HE said to me.

[dippydodo03]

There you go again.

[MrCrowley]

Ok wow.

Dippy - You shouldnt share your PM's with other members. Its just wrong. They don't call 'em Private Messages for nothing you know.

Schmanman - You shouldnt of posted this thread. the whole reason of PM's is to keep it private and to keep it between two people, not the whole damn forum. Its spamming up the forum and cluttering it with unecassary sh*t like this. Just keep it to yourselves next time. Does anyone else care that 2 members are having a good old natural fight between one another? Apart from BC as he is into this kinda sh*t no one else is interested.

No offence BC, I take great pleasure in reading your posts against forum no0bs

[SpudBlaster15]

Care to expand? I tried numerous times to get you to expand on all of the claims you made, but you never did, you either;

a) changed the subject
b) insulted me and my work
c) ignored my comments entirely

What does it take to reason with you?

[dippydodo03]

I don't think you got what PCGUY said.

[SpudBlaster15]

Here are dippy dildo's comments, if you can tie them together with mine, you will see exactly where I am coming from when I state the things I do.

This isn't about the guns, this about how much of a dick you are. I have only been building these type of guns for 3 months but I work for a pneumatics company and have more experience than you ever will you little crap. I'm sick of having to communicate with you. Your in possible to get along with.

My Paintball Gun
-Made by Tippmann

Not "custom" made like you piece of crap thing you call a paintball gun.

Sounds like someone is getting a little mad!!!

By my count you have only posted three guns. All of them to be less than average. How many have you made?

Second of all my Tippmann would kick the crap out of your "paintball gun". Might have a higher volocity (if it even holds air) but you cant even use it in paintball. By the time you have got one round off I will have shot you over 100 times.

You think my guns suck? Your paintball gun is as average as me takeing a crap. Wow, you painted it and used a sprinkler valve. It some what resembles a stick. An itybity chamber with a long barrel.

My guns work great and work exactly what I need them for. The last cannon I posted was a mistake. It was actually going to be a horn. I could out build you any day!!!

Okay, here I go again.

If you even could aim it with its droopy barrel you might be able to break a paintball on my mask, if you could even find me. Saw your combustion gun.Looks like it is only being held together by duct tape and epoxy. Take the time to build what masterpiece?

If I'm running out of things to attack you about then you must have run out long ago. You first started with the fact you think I'm a fool and then you thought you could attack my guns when your guns look like something that came out of my dog ass hole after eating left overs.

You need to get some sort of mental help. You need to talk about your problems. I have never met any one that has thought so highly of themselves but everything about them sucks. Good luke with life and I am done with you humiliating yourself by stateing points that have been proved.

If you have any other impulses that tell you to say any thing to me, don't bother because I don't care and they most likely what you have to say is total bull crap.

Now, tell me, doesnt this sound like a whole lot of basisless claims that have absolutely no supporting evidence?