Best valve

Cannons powered by pneumatic pressure (compressed gas) using a valve or other release.
User avatar
roughboy
Specialist
Specialist
Posts: 197
Joined: Fri May 12, 2006 12:43 am

which valve is more powerful and more better?

spudtech's supah valve

or

The mauler valve
User avatar
CS
Moderator
Moderator
Posts: 1837
Joined: Fri Feb 18, 2005 5:32 pm
Location: Southern Utah

O how many questions could be answered if the Spud Wiki/ Spudding Handbook was read...

<a href="http://www.spudfiles.com/spud_wiki/inde ... lve">Supah Valve - The Spudding Handbook</a>

<a href="http://www.spudfiles.com/spud_wiki/inde ... ve">Mauler Valve - The Spudding Handbook</a>
User avatar
roughboy
Specialist
Specialist
Posts: 197
Joined: Fri May 12, 2006 12:43 am

can i attach a 12oz. co2 and some copper pipes to make a gun or is the mauler valve too big for those fittings. sorry stupid ?
User avatar
CS
Moderator
Moderator
Posts: 1837
Joined: Fri Feb 18, 2005 5:32 pm
Location: Southern Utah

Come on, lets get some proposed physical dimensions. "Some copper pipes" does not give me much to work with.

Although considering the porting of both the "Mauler," and "Supah" valves are 2", I would assume "some copper pipes" are of a fairly small diameter. As I know copper pipe is available in excess of 2" nominal size diameter, it is fairly expensive. So I would suggest a chamber diameter of at least 3". So to be cost effective PVC would be a choice material.

I know my claims are a bit speculatory in nature, so feel free to take me up on any points. Not that you couldn't have prior...
User avatar
frankrede
Sergeant Major 2
Sergeant Major 2
Posts: 3220
Joined: Thu Jul 20, 2006 9:47 pm
Has thanked: 1 time
Been thanked: 1 time

roughboy wrote:can i attach a 12oz. co2 and some copper pipes to make a gun or is the mauler valve too big for those fittings. sorry stupid ?
Gort makes smaller versions of the mauler.
but since you cannon is copper why not just make your own?
Current project: Afghanistan deployment
User avatar
roughboy
Specialist
Specialist
Posts: 197
Joined: Fri May 12, 2006 12:43 am

which is more powerful a Modified sprinkler valve or a piston valve?
User avatar
hi
Staff Sergeant 2
Staff Sergeant 2
Posts: 1619
Joined: Thu Feb 01, 2007 9:28 pm

a 1'' piston valve is about 3 times as power full as a 1'' sprinkler valve modded.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote

you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
User avatar
roughboy
Specialist
Specialist
Posts: 197
Joined: Fri May 12, 2006 12:43 am

So what your saying is a piston valve is 3x more powerful then a mod. sprinkler? or are they 3x powerful at the same time?
User avatar
CS
Moderator
Moderator
Posts: 1837
Joined: Fri Feb 18, 2005 5:32 pm
Location: Southern Utah

"a 1'' piston valve is about 3 times as power full as a 1'' sprinkler valve modded."

Let me just clarify, that claim was pulled out of his ass. It is a general consensus that piston valves of the same porting as there diaphragm counter-parts will preform better. I can not honestly toss out any numerical data, but I think that the general consensus that a piston valve results in greater performance is true.

I suggest you do some reading in the Spud Wiki, as your questions are terribly vague, and basic.
User avatar
roughboy
Specialist
Specialist
Posts: 197
Joined: Fri May 12, 2006 12:43 am

i see ok thanks
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post