Sound levels

Boom! The classic potato gun harnesses the combustion of flammable vapor.
User avatar
pneumaticcannons
Specialist 3
Specialist 3
Posts: 392
Joined: Sat Oct 30, 2010 9:45 am
Location: shite country in asia
Contact:

Sounds like your spark gap is too small. My hybrids SG is larger than that and often fails to ignite below 3x mixes, and thats a hybrid.

Edit: ninja'd by warhead. :D
ramicaza <- My Youtube Channel
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26219
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 581 times
Been thanked: 347 times

This was bloody loud when tested indoors :D
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
battlelava
Specialist
Specialist
Posts: 142
Joined: Wed Oct 26, 2011 9:13 pm

Ill move the screw out a little, no time to get syringe and test probably

edit: lied found a peizo from a long lighter, so it defiantly can't be a spark now
warhead052
Staff Sergeant 3
Staff Sergeant 3
Posts: 1769
Joined: Mon Mar 21, 2011 5:41 pm

Try a bigger spark. Move the screw that had the positive wire in the video out about 2 turns, and then try it with fuel.
User avatar
battlelava
Specialist
Specialist
Posts: 142
Joined: Wed Oct 26, 2011 9:13 pm

Will do, ill give it a burst of propane because I still don't have a syringe or camber fan
warhead052
Staff Sergeant 3
Staff Sergeant 3
Posts: 1769
Joined: Mon Mar 21, 2011 5:41 pm

Ok, if that doesn't work, use hairspray or something. I know its basic, and makes the chamber sticky, but if nothing else works and that does, I would put up with it. Just make sure you clean the prongs after each game or something. And clean the threads on the cap to make sure they don't get stuck.
User avatar
battlelava
Specialist
Specialist
Posts: 142
Joined: Wed Oct 26, 2011 9:13 pm

Could i put some type of oil on the cap threads so it goes on and off easier. I'm going to go test it right now

Edit: Im not going to test it now because my parents are being a pain guess i have to wait til next sunday the earliest to test it :angryfire: guess im stuck doing nothing for the rest of today
warhead052
Staff Sergeant 3
Staff Sergeant 3
Posts: 1769
Joined: Mon Mar 21, 2011 5:41 pm

I wouldn't oil it mostly because its flammable. Don't want random ignitions.
User avatar
battlelava
Specialist
Specialist
Posts: 142
Joined: Wed Oct 26, 2011 9:13 pm

warhead052 wrote:I wouldn't oil it mostly because its flammable. Don't want random ignitions.
What about a dry lubricant,
warhead052
Staff Sergeant 3
Staff Sergeant 3
Posts: 1769
Joined: Mon Mar 21, 2011 5:41 pm

Dunno, you could try, but I think its still better to carry a wrench with you to torque it open if it gets stuck.
natas
Specialist
Specialist
Posts: 122
Joined: Mon Feb 27, 2012 6:02 pm

U can use a soap based lubricant/fat that plumbers use. At least we have that here in Norway
Last edited by natas on Thu Apr 19, 2012 1:45 pm, edited 1 time in total.
To make dreams come true, u must wake up.
User avatar
battlelava
Specialist
Specialist
Posts: 142
Joined: Wed Oct 26, 2011 9:13 pm

Ill give it a try worst case ill make a ghetto wrench that i can attach to my molle gear. In the meantime im thinking of possible projectiles, besides the obvious bb's and nerf footballs. Would duct tape balls be dangerous (indirect fire) or should i go look for foam balls somewere
warhead052
Staff Sergeant 3
Staff Sergeant 3
Posts: 1769
Joined: Mon Mar 21, 2011 5:41 pm

Nah, duct tape balls are fine. As long as it doesn't hit someone directly, or if it has enough time to slow down it should be fine. I like to make paper sabots and put bbs or paintballs in them for a nice effect. I also mix it with flour to create a air burst effect.
User avatar
battlelava
Specialist
Specialist
Posts: 142
Joined: Wed Oct 26, 2011 9:13 pm

warhead052 wrote:Nah, duct tape balls are fine. As long as it doesn't hit someone directly, or if it has enough time to slow down it should be fine. I like to make paper sabots and put bbs or paintballs in them for a nice effect. I also mix it with flour to create a air burst effect.
That is what i was going to do, but then i thought about how fast ill go through bb's with a 2" barrel lol. I figure at least if i had an alternative it might be better. I'll make some paper balls wrapped with duct tape for a little weight to give it a good distance.
warhead052
Staff Sergeant 3
Staff Sergeant 3
Posts: 1769
Joined: Mon Mar 21, 2011 5:41 pm

If you had a 2.5" barrel, you could shoot tennis balls. Those don't hurt too badly when they come in at an angle. If its full on, I don't ever want to experience that again, but at an angle its not so bad because it slows down enough.
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post