Posted: Tue Mar 28, 2006 3:26 pm
use slingshot ammo.works great.made lots of small holes in a car door from 80 feet away.I shot it with a 2 inch diameter,15 foot barrel.put potato down the barrel first,then poured in bb's
Page 2 of 2
Posted: Tue Mar 28, 2006 4:52 pm
whatkind of gun do you have
Posted: Thu Mar 30, 2006 7:05 am
a pnumatic. go here. http://www.spudfiles.com/forums/viewtopic.php?t=1663&
Posted: Thu Mar 30, 2006 7:45 am
wow! awsome cannon
Posted: Thu Apr 06, 2006 7:23 pm
I have found that a very good material to use is SIDEWALK SALT, the big chunks. I put a potato down the barrel first, then i pour about a cup of salt.
Posted: Thu Apr 06, 2006 8:01 pm
that website
is asome the have al kinds of chemicals you can even buy uranium
Posted: Mon Apr 10, 2006 4:17 pm
airsoft bbs are good for shotguns. they go a decent distance and hurt like hell. u can put like 500 in a 2" barrel. think of that, 500 bbs hitting at the same time. u use em by putting them in between two paper towels, foam pads, etc.
Posted: Tue Apr 11, 2006 1:10 am
non-lethal ammo
ok first you set a big chunk of silicon in somthing you can get it out of than you wait for it to dry properly.
than take your chunck and some scissors and cut it into millions of little pieces
put your little pieces in a bowl and add some grease,stirr untill well mixed
find a creative way of stuffing these down your barrel and fire
this will proberly work better with a combustion
ok first you set a big chunk of silicon in somthing you can get it out of than you wait for it to dry properly.
than take your chunck and some scissors and cut it into millions of little pieces
put your little pieces in a bowl and add some grease,stirr untill well mixed
find a creative way of stuffing these down your barrel and fire
this will proberly work better with a combustion
Posted: Thu Apr 13, 2006 10:58 am
why combustion ? It seems the grease would catch on fire. It would work just as good with a pnumatic. 
Posted: Fri Apr 14, 2006 3:00 am
exactlyschmanman wrote:why combustion ? It seems the grease would catch on fire.
Posted: Fri Apr 14, 2006 6:07 am
Granted ...I am not an admin or such;but in keeping up with what I have read from the people in authority positions on these sites ,I MUST ponit out that I was recently at the BATF website and noted that these devices were not considered firearms as long as they were used for recreational purposes and did not shoot things like flaming tennis balls etc. . As the fella that runs the Spudtech site pointed out : let's keep it safe and sane here... I THINK IT GOES WITHOUT HAVING TO BE SAID THAT CERTAIN THINGS DON"T REALLY NEED TO BE SO ABRUPTLY FOLLOWED UP ON WITH A SPECIFIC RESPONSE THROWN OUT ON THE TABLE THAT WOULD ALLOW "BIG BROTHER" TOPUT THE STOPS ON OTHERWISE DECADES OLD FREE WHEELING FUN.
But then,I am only 39yrs old have 6children 12 mo--19 yrs...I could be wrong...
But then,I am only 39yrs old have 6children 12 mo--19 yrs...I could be wrong...
Posted: Fri Apr 14, 2006 3:52 pm
Indeed, shooting flaming projectiles is illegal... and I would have removed all discussion of shooting "grease smeared rubber" projectiles if I thought it had the slightest chance of acctualy working.
The flash point of grease is ~250 *C.
The flash point of grease is ~250 *C.
Posted: Sat Apr 15, 2006 3:35 am
i didnt even know grease was flammable until schmanman said so,i replied as a joke
Posted: Mon Jun 19, 2006 3:47 pm
For a paintball shotgun, Sch 40 3/4" for small spread, thin wall 3/4" for medium and 1" Sch 40 for BIG spread.
Posted: Fri Jul 07, 2006 2:26 pm
no no no wat u do is get 1 1/2" sch 40 and put a milk cap in front of and behind the bbs