Page 4 of 4
Posted: Mon Nov 26, 2007 4:38 pm
by octane89
I just read some of the astm standards a looked them up. Some say a piece is for a pressure application but on mcmaster they say not too. A little confusing to me, but I will get a grasp.
Posted: Mon Nov 26, 2007 4:42 pm
by MrCrowley
Being the type of person I am I kept the docket.
It was part #4880K614
Posted: Thu Nov 29, 2007 5:09 am
by mtronic
paintball 1 Middle East 0
Awesome videos man. What it the silver metal looking device in the picture of your stock pile? A high pressure pneumatic?
Posted: Thu Nov 29, 2007 2:20 pm
by MrCrowley
Pretty much yeah, but it's limited to 150psi due to the QEV and sprinkler valve.
Posted: Mon Dec 10, 2007 2:56 am
by MrCrowley
Update:
T-Shirt Barrel, was originally my 80mm DWV chamber from my very first combustion, which I decided did better as a T-Shirt barrel, so I cut it up and glued on a spare 2" threaded adapter.
I tape up old T-Shirts so they don't come apart when fired and they seem to go around about 60m at 70psi and have quite a bit of kick.
Maybe a video tomorrow
Pictures on front page.
Oh yeah I know it's really messy but the chamber (now T-Shirt barrel) had about 3 holes in it and is over 2 years old and I have no spray paint whatsoever.