The over all length is about 16.5 inches, the barrel length is 12 inches, and the chamber is 1/2" type L 12 inches long. The piston is cast from epoxy with an inner tube crazy glued on for sealing face.
Tyler's Air Soft Gun.
-
tylerthetatertosser
- Specialist
- Posts: 107
- Joined: Sun Oct 22, 2006 10:27 pm
- Location: British Columbia
This is my Air soft co-axial cannon. I have had this for a while but never posted.
The over all length is about 16.5 inches, the barrel length is 12 inches, and the chamber is 1/2" type L 12 inches long. The piston is cast from epoxy with an inner tube crazy glued on for sealing face.
The over all length is about 16.5 inches, the barrel length is 12 inches, and the chamber is 1/2" type L 12 inches long. The piston is cast from epoxy with an inner tube crazy glued on for sealing face.
Last edited by tylerthetatertosser on Mon Oct 29, 2007 11:45 pm, edited 1 time in total.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26219
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 581 times
- Been thanked: 347 times
looks like good shock pump material, what pressures are you using?
Kudos for the cast epoxy piston, shame about the excess pilot volume
Kudos for the cast epoxy piston, shame about the excess pilot volume
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
tylerthetatertosser
- Specialist
- Posts: 107
- Joined: Sun Oct 22, 2006 10:27 pm
- Location: British Columbia
I think the barrel is 5/16 brake line, and i can get it up to 200 psi with my regular bike pump
-
SpudBlaster15
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 5:59 pm, edited 1 time in total.
I'm making one for my upcomming gunSpudBlaster15 wrote:I think you need to build a high pressure pump and take it to 300psi
Failure to plan is planning to fail.
The 7 P's - Proper Prior Preparation Prevents Piss Poor Performance
The 7 P's - Proper Prior Preparation Prevents Piss Poor Performance
-
PVC Arsenal 17
- Staff Sergeant 3
- Posts: 1762
- Joined: Mon Mar 27, 2006 4:18 pm
- Location: United States
Why the quick disconnect? All it's doing is making your gun less efficient.
In place of it you should put a bushing that will bring it down to 1/4" FPT. Connect it to the blowgun using a close nipple.
Otherwise, nice gun. It should be safe enough to take way beyond 100 psi. Post pics of the damage!
In place of it you should put a bushing that will bring it down to 1/4" FPT. Connect it to the blowgun using a close nipple.
Otherwise, nice gun. It should be safe enough to take way beyond 100 psi. Post pics of the damage!
-
tylerthetatertosser
- Specialist
- Posts: 107
- Joined: Sun Oct 22, 2006 10:27 pm
- Location: British Columbia
The barrel is held in palace with epoxy, and the shot was from about a foot away from the can.how is the barrel held in place? how far was your shot from?
I use the quick connect because i have 3 copper pneumatics and one blow gun, i will get more blow guns for $ 3.99 ea when i go to a city 2 hours away.Why the quick disconnect?
-
spudgunnerwryyyyy
- Specialist 2
- Posts: 261
- Joined: Thu Jul 12, 2007 10:54 pm
Nice gun, and like jsr i know that you can reduce the pilot volume alot and that would lead to huge improvements in performance
The Doors are awesome, Led Zeppelin is amazing, and Motley Crue kicks @$$.
Go Orange Box
RAP SUCKS
Go Orange Box
RAP SUCKS
-
Sticky_Tape
- Sergeant 2
- Posts: 1175
- Joined: Thu Jan 31, 2008 6:35 pm
- Location: Sydney, Nova Scotia, Canada.
What is the adapter on the front of the gun the one that conects to the tip of the barrel to hold it inside the chamber?
Nice gun by the way!
Nice gun by the way!
-
schmanman
- Staff Sergeant 2
- Posts: 1685
- Joined: Sat Mar 25, 2006 12:28 pm
- Location: Michigan,U.S.A
- Contact:
nivekatoz wrote:The ture test of any gun has to be more than 1 foot away................I think at least 20 feet away.......Thats just my thought.....
I'm thinking 50-100 feet.
Persistence is a measure of faith in yourself
-
bigbob12345
- Staff Sergeant
- Posts: 1516
- Joined: Sat Dec 01, 2007 9:13 am
- Location: Mercer Island,Washington
very nice gun kinda like what Im currently working on exept mines pvc.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14 Replies
- 6902 Views
-
Last post by locksmith
-
- 18 Replies
- 13048 Views
-
Last post by spanerman
-
- 9 Replies
- 4134 Views
-
Last post by TwitchTheAussie
-
- 10 Replies
- 4596 Views
-
Last post by Hubb
-
- 11 Replies
- 3488 Views
-
Last post by twizi
