Electric steam cannon?
-
iknowmy3tables
- Staff Sergeant


- Posts: 1596
- Joined: Fri Dec 15, 2006 3:57 pm
- Location: maryland
- Has thanked: 3 times
- Been thanked: 9 times
uhm an arc of electricity in water would ether be short circuited, or if it was distilled it would slowly separate into hydrogen and oxygen and become highly explosive and dangerous
yes steam guns have been made, but a better heat source than an arc would be a electric heating coil, which would take a decent amount of time to heat up
I'd still prefer propane because its faster and usually hotter
yes steam guns have been made, but a better heat source than an arc would be a electric heating coil, which would take a decent amount of time to heat up
I'd still prefer propane because its faster and usually hotter
This is extremely unpractical but it does work, yes.
On the other hand, you could use a fraction of the energy to convert the water into oxygen and hydrogen..

*edit* Mister Iknowmy3tables, in fact it won't short circuit since you'd need a capacitor as large as a soda bottle anyway, and as far as i know, capacitors don't short circuit.
Edit two!
What you'll want is a low voltage, fast discharging beefy capacitor. (low voltage will heat the water up more but not too low, or it will just not flow at all.)
And pretty much distilled water. (distilled water is actually an insulator according to my physics book)
On the other hand, you could use a fraction of the energy to convert the water into oxygen and hydrogen..
*edit* Mister Iknowmy3tables, in fact it won't short circuit since you'd need a capacitor as large as a soda bottle anyway, and as far as i know, capacitors don't short circuit.
Edit two!
What you'll want is a low voltage, fast discharging beefy capacitor. (low voltage will heat the water up more but not too low, or it will just not flow at all.)
And pretty much distilled water. (distilled water is actually an insulator according to my physics book)
Last edited by Necrosis on Fri Nov 09, 2007 4:47 pm, edited 1 time in total.
- jackssmirkingrevenge
- Five Star General

- Posts: 26219
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 581 times
- Been thanked: 347 times
Surely you meant Electric steam kettle?

Generating instantaneous steam is impractical, the best steam guns generate pressure in a boiler the release it with a valve in the manner of ordinary pneumatics.
Generating instantaneous steam is impractical, the best steam guns generate pressure in a boiler the release it with a valve in the manner of ordinary pneumatics.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Well I got the idea from seeing exploding wires with capacitors http://www.youtube.com/watch?v=KxeUV7CXrlI, and assumed water conducted electricity and might do something similar. Maybe wire in water? I guess it's probably one of those things where you can get better performance in a smaller package using existing methods. Still might be a fun experiment 8).
-
iknowmy3tables
- Staff Sergeant


- Posts: 1596
- Joined: Fri Dec 15, 2006 3:57 pm
- Location: maryland
- Has thanked: 3 times
- Been thanked: 9 times
pumping electricity through tap water maybe it will heat the water a little but it will short circuit your power supply,
its not the same the whole exploding wire thing works because air is not a conductor and when its forced through that resistance it generates heat
tap water is a conductor so it will heat your power supply up and fry most of the parts
its the same reason why this black powder http://www.ctmuzzleloaders.com/ctml_exp ... parks.html wont ignite no resistance no heat
but say iodized or distilled water isn't a conductor but it still won't work because most of the energy in the charge is going to separating the H2O in an electrolysis reaction
its not the same the whole exploding wire thing works because air is not a conductor and when its forced through that resistance it generates heat
tap water is a conductor so it will heat your power supply up and fry most of the parts
its the same reason why this black powder http://www.ctmuzzleloaders.com/ctml_exp ... parks.html wont ignite no resistance no heat
but say iodized or distilled water isn't a conductor but it still won't work because most of the energy in the charge is going to separating the H2O in an electrolysis reaction
-
Novacastrian
- Staff Sergeant 2

- Posts: 1603
- Joined: Sat Aug 11, 2007 6:59 pm
- Been thanked: 1 time
jon_89 wrote:what about using the heat from a resistor?
Because that would reduce efficiency to about .05%
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
Fire is usually the best way to heat steam guns of any kind. The more fire the better. It would be good to go for high pressure and low volume, since you can use a smaller heat source (i.e. blowtorch). I may try a 1000 psi steam gun some day, but something tells me that that day is still quite a long way away.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
MIT found a way to do it. 3500 psi steam with simple materials, no boiler, and less than 2 minutes reload time. Don't give up on this, because it can be done somehow, you just need to find a way.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
Wich would create even more pressure, though.iknowmy3tables wrote: but say iodized or distilled water isn't a conductor but it still won't work because most of the energy in the charge is going to separating the H2O in an electrolysis reaction
Along with a stoichiometric mix of pure O2 and H2 which has a lower ignition energy than oxy-acetylene and is very prone to detonations.Wich would create even more pressure, though.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
- Fnord
- First Sergeant 2

- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
MIT found a way to do it. 3500 psi steam with simple materials, no boiler, and less than 2 minutes reload time. Don't give up on this, because it can be done somehow, you just need to find a way.
Oh wait... DUH. I feel stupid for not thinking of how they did it earlier.
Anyone ever seen distilled watter is a microwave? It doesn't boil if it is left completely still, but when you touch it, it explodes. That may be how it was done.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 44 Replies
- 11965 Views
-
Last post by Bubba05
-
- 70 Replies
- 17499 Views
-
Last post by Ragnarok
-
- 5 Replies
- 2339 Views
-
Last post by iknowmy3tables
-
- 18 Replies
- 5958 Views
-
Last post by sssssbooom
-
- 11 Replies
- 2895 Views
-
Last post by TurboSuper




