How do people attach the blowgun for a cloud?

[iisthemuffin]

Simple question really. I saw one that explained it but he had some weird nozzle. I just need to attatch the blow gun to my chamber. Its hard for me to explain things. I dont tihnk i have anything in the tool box to do so but im going to go check while im awaiting a reply. Heres a link of what i mean. Im sorry to be so short.

http://www.spudfiles.com/forums/my-ghet ... t9359.html

[Hubb]

You people? What do you mean, "you people"?

JK. Drill a hole the same size as your nozzle, then use the nozzle to cut the threads. You can then use epoxy to hold it in place.

[iisthemuffin]

The end of my blowgun has female threads. Thats my problem.

Nerver mind i figured it out. I found a piece of air soft barrel i had lieing around and it was jsut the right size to screw in and cut threads into. So i cut the threads and warapped it in teflon and tightly screwed it in.

[MrCrowley]

You take the nozzle off the 1/8" threaded end of the blow gun and get a 1/8" brass nipple and thread it into the blowgun, then drill a hole in the chamber and thread it in.

[iisthemuffin]

I thought so. Im really jsut making this from spare stuff though. If i had the nipple i would do that.

[blind909]

In your firs post, were you talking about this one:

http://www.spudfiles.com/forums/viewtop ... tml#111497
If so, I took the 1/8 inch nozzle off, added a 1/8 inch to 1/4 inch brass bushing, and then attach some air hose to the nozzle and then to my air chamber.

Sorry, Ignore this, I thought you meant connecting the blowgun to the air chamber. Sorry!