BB Shooter

[PCGUY]

<div align="center">BB SHOOTER

Provided By - Spudinator

I saw Arson's beautiful CrowKiller and wanted to make something similar. I did not use a sprinkler valve, nor is it electrically actuated, but its still cool. I can convert it to full auto if I want through drilling out a special plug I have for a magazine. I'll post pics and explain along.

<img src="http://www.spudfiles.com/official_pics/1.jpg">

Here's the gun, It uses air from my compressor.

<img src="http://www.spudfiles.com/official_pics/2.jpg">

Here is all the main parts of the loading mechanism, which really consists of a special tee fitting that the barrel passes through, which is drilled through from the other top female part of it, for dropping bb's into it.

<img src="http://www.spudfiles.com/official_pics/3.jpg">

That's the hole that the bb's are dropped into.

<img src="http://www.spudfiles.com/official_pics/4.jpg">

That's the screw that plugs the breech when firing.

<img src="http://www.spudfiles.com/official_pics/5.jpg">

Here is the small but powerful magnet that holds the bb in place when preparing to shoot. It also
conveniently sucks the bb down when loading, no shaking it around to get the bb to drop through.

<img src="http://www.spudfiles.com/official_pics/6.jpg">

Here's the trigger, which has continuous feed from my compressor.

<img src="http://www.spudfiles.com/official_pics/7.jpg">

The things pretty damn accurate, just look along the barrel and pull the trigger sharply.

Its very accurate for a gun made from scratch that does not even have sights on it. The copper tubing is just for looks, the barrel is sleeved inside of it. notice the redneck securing fashion I used for it -tape. All in all a damn nice and functional gun. gonna go shoot some starlings with it, at least I'll scare them with it.

Provided By - Spudinator</div>

[Aaron ?????]

Where did u get the tee fitting? im thinking of making one that fits a magazine of bbs in the tee

[theexp]

spudinator might have machined it, because he does alot of machining and such

[bubblebathman]

yea maybe but u never know hu

[deathtodeer666]

I'd put a small tank and 12 gram co2 adapter on it but that would cost more and i guess this is just a fun gun for the garage

[townbomber_01]

nice gun. how does it work?

[Matt982]

hey man that gun is pretty awesome. im goin to make a bb sniper modled after a m-82 sniper rifle. I want it to look just liek the m-82 but also be portable. Which should i make it to give me the most power, a air powered or a combustion? im also limited on space

[frankrede]

Reminds me of a tusken raider rifle

[Bluetooth]

I would make a Pneumatic, but thats just me .

[Pyro Ninja]

pretty cool gun i wish i could get parts to make guns like that

[HAYLO_Stealer]

ITs not really parts thats the prob. The ceativity has to be there too. you can alway buy parts slowly but if the sparks not there no ignintion in your mind

[Pyro Ninja]

might think about that but live in oz

[Flying_Salt]

Where'd you find that little magnet? All the ones I have are a little bulky.

[GOLDLOKS76]

sweet im trying to make one to but my luck isnt as good

[iknowmy3tables]

you can chip the magnet down a size or maybe he machined the magnet too