Plans for a 3-shot bb sniper rifle.

[elad311]

I got an idea for a good 3-shot bb sniper rifle:
Well?

[starman]

It will certainly work...probably isn't very practical. All that extra plumbing for just 2 extra portable BB shots?

[elad311]

It will certainly work...probably isn't very practical. All that extra plumbing for just 2 extra portable BB shots?

It'll be more useful for airsoft matches. 8)

[john bunsenburner]

You could make a semi auto instdead, with a bulk tank sttached and every shot one bb, so pull trigger boom, let go of trigger, it would be expensive i guess but in the heat of a batel very useful, or a full auto gun...?

[LCTChamp]

Well if I'm not mistaken most guns in airsoft matches are semi-auto or automatic with atleast 12 round clips. So a 3 shot gun won't do much good. I also think the 1" sprinkler valve is a little overkill for a bb gun. JSR proved that a blowgun can be used as a main valve in an airsoft gun. Or you could just use a ball valve. If you want to use a homemade gun in an airsoft match make an inline vortex or vortex cap bbmg

[jackssmirkingrevenge]

Agreed with the above, a blowgun trigger, simple T magazine and one sizable chamber will give you a lot more shots with good power.

[john bunsenburner]

Sorry for the slightly off topic question but, you seem to have made several good tests on Blowgun valves, do you have results or some other kind of document that i could read about them?

[jackssmirkingrevenge]

Sorry for the slightly off topic question but, you seem to have made several good tests on Blowgun valves, do you have results or some other kind of document that i could read about them?

All you need to know.

Provided you have a long barrel, decent pressure (80 psi plus) and "snatch" the valve, you'll have enough power for destructive plinking, let alone airsoft.

[john bunsenburner]

Ok sounds like fun, i am off to have a read, maybe i will use that blow gun instead of the hamer valve after all...

Edit: Is the blowgun valve there modded or not? If then in which way?

[jackssmirkingrevenge]

Completely unmodded and the barrel is just stuck in with masking tape

[john bunsenburner]

Wow, if that is un modded then what will modding do?!
One of those stupid and annoying what is better questions is to follow beforê i settel on what valve to use:

I am building a sniper rifle, bulk tank powered and using 300psi. I want alot of power and accuracy so should i use a blowgun(modded) or a Hammer valve?

[Demon]

I got an idea for a good 3-shot bb sniper rifle:

HUM HUM

http://www.spudfiles.com/forums/3-shots ... 16485.html


DONT make this thing, i did the error of making it and discovered then the sprinkler valve stay open while you presurise it with one of the 3 chambers

[jackssmirkingrevenge]

I am building a sniper rifle, bulk tank powered and using 300psi. I want alot of power and accuracy so should i use a blowgun(modded) or a Hammer valve?

A hammer valve will give you more consistency and opening speed, so for power and accuracy, it's the way to go.

Also, the more pressure you put in, the harder a blowgun is going to be to open, so at 300 psi firing would be a bit of a chore.

[twizi]

what did u use for a barell jsr

[john bunsenburner]

And opening a hammer valve would also be pretty hard...ill see if i could some how combine the two. Thank you for the help