spark ignitors?

[raptorforce]

ok, so i realize they make a spark to set off the mixture but what exactly are they? and where do you buy them from?

this is off topic of the title but, i was wondering could you spray and aerosol can into a Schedar valve to fill the combustion chamber up?

[Moonbogg]

They are piezo BBQ ignitors and can be found at hardware stores or online spudgun stores. Check out the spudfiles sponsors.

[raptorforce]

They are piezo BBQ ignitors and can be found at hardware stores or online spudgun stores. Check out the spudfiles sponsors.

http://www.antonline.com/p_20610-GP_347282.htm
would this be what your talking about? if not can someone show me a picture/link and what to look it up under

[jackssmirkingrevenge]

You can get one even cheaper from a piezo cigarette lighter:

this is off topic of the title but, i was wondering could you spray and aerosol can into a Schedar valve to fill the combustion chamber up?

Not going to happen. But you could potentially inject butane or propane through a schrader with a syringe...

[raptorforce]

You can get one even cheaper from a piezo cigarette lighter:



would what i posted still work because it would be alot simplier for me?

this is off topic of the title but, i was wondering could you spray and aerosol can into a Schedar valve to fill the combustion chamber up?

Not going to happen. But you could potentially inject butane or propane through a schrader with a syringe...

how do you fill a syringe with propane?
im a noob when it comes to combustions

[jackssmirkingrevenge]

would what i posted still work because it would be alot simplier for me?

Yes, and it would be much easier to install as well.

how do you fill a syringe with propane?

[jimmy101]

http://www.antonline.com/p_20610-GP_347282.htm
would this be what your talking about? if not can someone show me a picture/link and what to look it up under

Yep, that's a common one. $15 is a bit pricey ($8 + $8 shipping). Your local hardware store probably has them for less. Check near the BBQs.

[jaythedogg]

This is the one I have in my current cannon:



(As linked above)

I bought mine at Menards (hardware/home store) for less than $8.00

Thinking maybe the spark isn't "hot" enough? Dunno, but my cannon won't ignite.

[psycix]

If you can barely see the spark, then it is more then "hot" enough to ignite your mixture.
If the cannon doesn't ignite with a visible spark, then it's your fuel mixture.

[rcman50166]

The Sparker Reference Guide

[raptorforce]

The Sparker Reference Guide

thanks for the link thats a good source