No tater...just a blast?

Cannons powered by pneumatic pressure (compressed gas) using a valve or other release.
bionic
Private
Private
Posts: 11
Joined: Sat Jan 23, 2010 11:58 am

I want to dry fire an air cannon to vent a high force blast of air. Watching videos you see the effects of the air venting the barrels and it looks like it is powerful on its own.

I don't need to fire a projectile but I do want lots of air to come out. Using 2" pipe what is the ideal length for a tank for this setup? That is, what is the smallest tank made of 2 inch pipe I can use and still get an impressive air blast? Barrel would be stubby and 3/4" pipe. My goal is to go as small as possible but still be powerful. What do you guys think?
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

its gotta be BIG if you want a strong blast
User avatar
Crna Legija
First Sergeant 2
First Sergeant 2
Posts: 2333
Joined: Sun Jul 20, 2008 5:14 am
Location: australia

it dosent need to be big if you use high pressure. 3 feet chamber and barrel with a 2 inch piston valve at 120 psi would knock you of your feet
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson

Add me on ps3: wannafuk, 8/11/11 cant wait
User avatar
inonickname
First Sergeant 4
First Sergeant 4
Posts: 2606
Joined: Sun Dec 07, 2008 3:27 am

-_- wrote:it dosent need to be big if you use high pressure. 3 feet chamber and barrel with a 2 inch piston valve at 120 psi would knock you of your feet
I'm going to have to disagree.

Is there a specific use for this?
PimpAssasinG wrote:no im strong but you are a fat gay mother sucker that gets raped by black man for fun
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

bigger chamber and lower pressure would work best
bionic
Private
Private
Posts: 11
Joined: Sat Jan 23, 2010 11:58 am

It is for an invention. It has nothing to do with destruction or weaponry or tatoes or anything like that. before I cut this 4 foot length of PVC I've got and put caps on it i wanted to check here first for the minimum length to cut to. I'd love to go to 1 foot of length or 2 foot max....for the tank. And keep pressures sort of low.

Picture a rolled up sock at about 2 inches from end of barrel - and when i say barrel I basically have a stub of 3/4 inch pipe as an outlet after the sprinkler vavle. i need to blast the sock ball across the room.
bionic
Private
Private
Posts: 11
Joined: Sat Jan 23, 2010 11:58 am

Update -

Made a pretty snazzy tank with 3/4" sprink valve. Lots of honking at 60 psi and lower. Blew a rolled up sock placed 2 inches in front of .75 " pipe barrel/nozzle whatever across the room ok I guess. Much too loud.

Even ported the top of the sprink and put in a 1/8th inch QEV/blow off. Still loud like a tuba.

Design was for a mousetrap. Mouse walks up stands on microswitch platform - puff - unharmed mouse blown into receptacle. Tank recharges. Ready for next mouse.

On to another invention Bye : )
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post