Airsoft Minigun - With Direct Feed BBMG Design Implemented

[Davidvaini]

Hey guys, I first want to start off on saying this is NOT my project. I only noticed it because of a site called http://www.hackaday.com

I saw the firing mech and it looked to be very similar to my direct feed bbmg design in which you utilize a hopup chamber and you have the co2 imported via the back.. it utilizes a combination of venturi effect for feeding and spring assisted feeding. In this case, he used an electric mag feeding system rather than a spring assisted to allow for higher capacity of ammunition.

here is the thread on the original direct feed bbmg design:
http://www.spudfiles.com/forums/bbmg-ai ... 16151.html

And this thread as well:
http://www.spudfiles.com/forums/co2-inf ... 20236.html


Anyways here is the link to the website with details of the gun:
http://kuba-t1000.com/minigun/index.php ... ls_minigun

here are some picture hijacked from the website:

[6T6FR302]

wow i can not imagine the cost and dedication of building that.

[Stolly32123]

Wow that looks insane. must have cost a fortune.

[SpudFarm]

Oh my god! I really have to get machine tools!

Builds like this is so amazing, it is so detailed and well built.

That's all my stunned mind have to say.

[jackssmirkingrevenge]

Good to see a gatling type airgun that actually functions, though of course other than "cool factor" you're not getting that much performance advantage over a normal BBMG. Yes, I'm jealous

[POLAND_SPUD]

Good to see that someone knows that push to connect fittings are really useful

[SpudFarm]

Yes, I'm jealous

We now know that the rare JSR has feelings

As to the gun I am not so stunned anymore, I could not access the website where the gun is so I'll just have to ask.
What kind of pressure is it running at?

[Zeus]

That gives me ideas, including doing a part time machining course.

Pretty, but how well does it function.

I can't see the page either, but these piccytars are quite nice.

By the way, you might want to resize the preview.

[jackssmirkingrevenge]

We now know that the rare JSR has feelings

Very, very occasionally...

What kind of pressure is it running at?

10 bar/145 psi, what the maker calls "high" pressure... pfft!

[SpudFarm]

We now know that the rare JSR has feelings

Very, very occasionally... what the maker calls "high" pressure... pfft!

It has happened twice in this thread

But I will stop talking about you and ask another question, does it say anything on the rate of fire?
Im sorry to ask so much but I can't access the web site for some reason..

[SpudBlaster15]

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.

[jackssmirkingrevenge]

He claims over 10,000 rpm using this "ammo chute":



If it's only using one barrel at a time, that sounds a little optimistic...

edit: wait a minute, it has a single barrel and they don't actually spin!

Just a pretty BBMG then

[Kuba_T1000]

Hi all!

WOW It's my project Thank you Davidvaini for this topic

Yes, it's a BBMG in Minigun style only - without spinning the barrels.

I've also made a classic BBMG in PVC using KANEDA'S STRAFER plans provided by Kaneda topic.

If you have any question, let's just say...

[adem70]

You can always put the real barrel down the center of the outer barrels and have the outers spin

[POLAND_SPUD]

@JSR
lol it took you a while to notice that
It's not exactly a BBMG - it's basically the same design as the one used on that gun with coiled tube used for magazine... ohh damn I can't find it right now...
oh well you know which one I am talkign about