pvc low temp

Because potatoes only last one shot!
metalmeltr
Specialist 4
Specialist 4
Posts: 426
Joined: Thu Dec 18, 2008 3:42 pm
Location: united states

how cold should i let it get before i quit using pvc for my cannons?
i live in ohio, very cold winters
User avatar
clemsonguy1125
Sergeant 5
Sergeant 5
Posts: 1485
Joined: Tue Jul 21, 2009 4:00 pm
Location: East Coast

Typically as soon as you need a jacket you should stop. So when the temperature is below 55.
metalmeltr
Specialist 4
Specialist 4
Posts: 426
Joined: Thu Dec 18, 2008 3:42 pm
Location: united states

ok thanks wasnt sure better safe than sorry, wont stop me in small diamiter haowever the combustion cannon i out of the question for the winter.
User avatar
clemsonguy1125
Sergeant 5
Sergeant 5
Posts: 1485
Joined: Tue Jul 21, 2009 4:00 pm
Location: East Coast

PVC doesnt get weaker, just more brittle, a fast opening valve or shock to the pipe(like dropping it or a piston valve opening) can cause it to crack and pressure will do the rest. So I would not use any piston valves or other high speed valves.
BFC
Private
Private
Posts: 16
Joined: Sun Aug 01, 2010 1:20 pm

Sorry to cut in, but if i store my cannons in the house and they are room temp. would it be safe to fire them like 3 or 4 times and then bring them back in side to warm up again??

-BFC
User avatar
clemsonguy1125
Sergeant 5
Sergeant 5
Posts: 1485
Joined: Tue Jul 21, 2009 4:00 pm
Location: East Coast

Well maybe, would you be filling them with cold air and what temperature? As long as you dont drop or "shock" it you should be fine. Also I would not use any piston valves at all.
BFC
Private
Private
Posts: 16
Joined: Sun Aug 01, 2010 1:20 pm

I was thinking more of my propane combustion cannons
User avatar
Fnord
First Sergeant 2
First Sergeant 2
Posts: 2239
Joined: Tue Feb 13, 2007 9:20 pm
Location: Pripyat
Been thanked: 1 time
Contact:

To give you an idea, just let a piece of 1.5" pipe sit outside in the temperature you want, and smack it with a hammer. Compare how easy it is to break with a pipe at room temperature.

Not exactly scientific, but it'll let you know what you're dealing with.

As long as the chamber is kept reasonably warm on a combustion you'll be fine. Shooting it kinda takes care of that for you.
Image
BFC
Private
Private
Posts: 16
Joined: Sun Aug 01, 2010 1:20 pm

alright thanks,

I like science experiments, so I will definitely do the "smash" test. haha

-BFC
User avatar
Biopyro
Corporal 2
Corporal 2
Posts: 654
Joined: Fri Aug 04, 2006 5:32 am
Location: UK

At lower temperatures the pipe can actually handle higher pressure, but it's impact resistance is lower. In a pneumatic the force of a piston hitting the PVC or a drop could put you in a nasty situation.
In a combustion this is not a problem because the "shock" is evenly distributed around the chamber and typically does not reach the rating of the chamber. The heat from combustion should stop the cannon becoming so cold that it does not behave in a predictable fashion, so you should be fine so long as you're sensible.
Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -Benjamin Franklin
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post