I have no idea how well it will work, I had to pretty much just guess on its geometry, I made the hole size 2.375", and the distance between the slots .5". Does any one have any thoughts, insights or experience with different or similar designs.
Muzzle brakes
I routed out a simple muzzle brakes today.
I have no idea how well it will work, I had to pretty much just guess on its geometry, I made the hole size 2.375", and the distance between the slots .5". Does any one have any thoughts, insights or experience with different or similar designs.
I have no idea how well it will work, I had to pretty much just guess on its geometry, I made the hole size 2.375", and the distance between the slots .5". Does any one have any thoughts, insights or experience with different or similar designs.
Last edited by drex on Tue Jun 07, 2011 11:50 pm, edited 1 time in total.
-
Gippeto
- First Sergeant 3
- Posts: 2504
- Joined: Sat Jan 19, 2008 10:14 am
- Location: Soon to be socialist shit hole.
- Has thanked: 2 times
- Been thanked: 17 times
Thoughts eh? 
That's kind of neat.
Maybe useful link...
http://rvbprecision.com/shooting/advent ... rakes.html
Pic is gone now, but it was the classic "hole in the side" muzzle brake.
Have spoken with a couple guys who have a TON of experience with airguns, one guy said optimum angle for slots was 17degrees....other guy said 15 degrees....I say split the difference.
Have built a few airstrippers, one that functions as a compensator. Improvements in accuracy were obvious once adjusted. Have done one in polished aluminum too...it's pretty, but doesn't belong to me anymore.
Group without the stripper installed. Crosman 2240.
That's kind of neat.
Maybe useful link...
http://rvbprecision.com/shooting/advent ... rakes.html
Pic is gone now, but it was the classic "hole in the side" muzzle brake.
Have spoken with a couple guys who have a TON of experience with airguns, one guy said optimum angle for slots was 17degrees....other guy said 15 degrees....I say split the difference.
Have built a few airstrippers, one that functions as a compensator. Improvements in accuracy were obvious once adjusted. Have done one in polished aluminum too...it's pretty, but doesn't belong to me anymore.
Group without the stripper installed. Crosman 2240.
"It could be that the purpose of your life is to serve as a warning to others" – unknown
Liberalism is a mental disorder, reality is it's cure.
Liberalism is a mental disorder, reality is it's cure.
-
POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
then you should strengthen itMuzzle breaks
Children are the future
unless we stop them now
unless we stop them now
-
exotechmaster
- Private
- Posts: 8
- Joined: Mon May 02, 2011 12:24 am
- Location: aust
that should work good. if it doesn't start again with angled vanes.
film it then compare the two and see what works better
looks cool in clear plastic
can't wait to see its development play out
film it then compare the two and see what works better
looks cool in clear plastic
can't wait to see its development play out
-
LovableAirGuns
- Specialist 2
- Posts: 267
- Joined: Tue Sep 28, 2010 5:58 am
wow that looks amazing and you should also try this website out
http://airgunartisans.com/AAMuzzlebreakMain.htm
http://airgunartisans.com/AAMuzzlebreakMain.htm
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
