Hi, joined this site ages ago, thought someone may like to see.
I have created a website called prometheanrifles.co.uk
Go to P22CMk1 to see current build progress of my rifle.
unfortunately 12ft/lb limit
Site is still under construction
Promethean rifles
-
killerbanjo
- Specialist 2
- Posts: 245
- Joined: Fri Jun 18, 2010 6:56 pm
Wow, nice! I think JSR will like this.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
I agree!
Great work Joe, you've come a long way. I remember this well: http://www.spudfiles.com/forums/bb-bolt ... ter,0.html
Great work Joe, you've come a long way. I remember this well: http://www.spudfiles.com/forums/bb-bolt ... ter,0.html
hectmarr wrote:You have to make many weapons, because this field is long and short life
Looks, good! Shame about the 12ft/lb limit though. However, you could crank up the power a bit on your own personal gun "hint hint" 
I have a lot of "things" that fire way over 12ft/lbs. As long as you're not being disruptive, i think it's fine imo.
Anyway, it should be a sweet build and be sure to post the finished thing here!
I have a lot of "things" that fire way over 12ft/lbs. As long as you're not being disruptive, i think it's fine imo.
Anyway, it should be a sweet build and be sure to post the finished thing here!
Last edited by qwerty on Tue Mar 27, 2012 3:29 pm, edited 1 time in total.
I visit occasionally to make unrelated posts.
-
Brian the brain
- Moderator
- Posts: 3497
- Joined: Mon Dec 05, 2005 2:06 am
- Location: Holland
- Been thanked: 6 times
Georgeous stuff!!
I love the muzzle break/ stabilisor.
I love the muzzle break/ stabilisor.
Gun Freak wrote:
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!
Can't ask for a better compliment!!
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!
Can't ask for a better compliment!!
-
wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Haha it´s also solenoid triggered 
, just like my
Beautiful build and machines :love4:
, just like myBeautiful build and machines :love4:
CpTn_lAw wrote:"yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
Air stripperBrian the brain wrote:I love the muzzle break/ stabilisor.
Sounds sexier
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
joepage2008x2
- Private 3
- Posts: 57
- Joined: Thu Jul 02, 2009 2:12 pm
Hi, thanks for the input.
Will eventually shoot it above the 12ft/lb limit but will apply for a license first, too much to risk, I'm 19 and in a decent job at the minute.
I always thought a bad machinist always blames his tools but after getting a decent industrial lathe instead of a model makers lathe and some tools with carbide inserts its amazing the finish you can get. A mirror finish on aluminium and nearly that on brass.
I'm trying to get similar results to the daystate Mk3, and therefore using electronic sensors and a solenoid. The difference is that my design does not use a conventional hammer valve, it is quite different but I cant give too much away.
Air stripper is exactly what it is, will eventuall polish it up, looks dirty in the photos.
Progress is very slow at the moment with work commitments, about half a douzen parts to make and the breech to redesign before I can make a bench fire.
Will eventually shoot it above the 12ft/lb limit but will apply for a license first, too much to risk, I'm 19 and in a decent job at the minute.
I always thought a bad machinist always blames his tools but after getting a decent industrial lathe instead of a model makers lathe and some tools with carbide inserts its amazing the finish you can get. A mirror finish on aluminium and nearly that on brass.
I'm trying to get similar results to the daystate Mk3, and therefore using electronic sensors and a solenoid. The difference is that my design does not use a conventional hammer valve, it is quite different but I cant give too much away.
Air stripper is exactly what it is, will eventuall polish it up, looks dirty in the photos.
Progress is very slow at the moment with work commitments, about half a douzen parts to make and the breech to redesign before I can make a bench fire.
-
joepage2008x2
- Private 3
- Posts: 57
- Joined: Thu Jul 02, 2009 2:12 pm
I remember thinking the same seeing some of the machined projects on here or the internet.
Got very lucky. A year and half back had no money, crappy old lathe, no money to even buy metal to machine, just enough to run my bike to college every week. Then twist of fortune, got paid out for motorbike accident, found lathe for price I couldnt refuse, got offered a job with decent pay. Been through a lot of crap the last four years and things are finally looking up.
Got very lucky. A year and half back had no money, crappy old lathe, no money to even buy metal to machine, just enough to run my bike to college every week. Then twist of fortune, got paid out for motorbike accident, found lathe for price I couldnt refuse, got offered a job with decent pay. Been through a lot of crap the last four years and things are finally looking up.
thats awesome man, glad to hear it. you're doing some impressive work and inspire me to keep workin and makin things better!
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
-
Brian the brain
- Moderator
- Posts: 3497
- Joined: Mon Dec 05, 2005 2:06 am
- Location: Holland
- Been thanked: 6 times
Smackjerkingrevenge wrote:
But okay..
You got me there..
I've seen sexier strippers...Air stripper
Sounds sexier
But okay..
You got me there..
Gun Freak wrote:
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!
Can't ask for a better compliment!!
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!
Can't ask for a better compliment!!
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Speechless... so sexy dude. Awesome work.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!