The picture should be pretty self explanitory but heres how it works. You would attach the wires that come out of the flash on to two peices of metal. You could use whatever you want as long as it conducts the electricity. Then on one of the tips you would attach a strip of sheet metal and make sure it has contact with the metal piece. then just bend it up a little so it doesn't touch the other piece of metal. This part would be optional but it would work better if you did it. Then just take a spring from whatever (you could use a pen) and attach it to the camera so it is touching the sheet metal. Then when you push the camera at someone it pushes down the strip of sheet metal and makes contact with the other piece of metal which sends electricity through the metal and shocks the person. It pretty much works just as easily as a stun gun except looks a little different. I hope this helped some of you but I don't want to make it easier for you to shock unwilling people so just please don't mess around with it.
