how hard is it to make a very simple pnematic?

[pizlo]

ive been thinking alot about combustion but it seems pneumatic has certain advantages, im handy enough and have some tools, i know ill need to make a trip to home depot so how hard is it and what do i need. thanks.

[Bluetooth]

GOOOOOOOOOOOOOOOOOOOOOOGLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[pizlo]

i would apretiat if somewone could tell me what works well googles a pretty wide selection and you people sem to have quite a bit of experiance

[Bluetooth]

Look around this site. Thats the reason there's a search button. Please use spell check.

[noname]

Try the simple design at PVC Ballistics. How to get there:
Click the button at the top of the page tha says "Other"
Go to "Links"
It should be on the links page.

[ProfessorAmadeus]

Here is another good tutorial. It is a good, simple, easy pneumatic gun.

http://www.spudfiles.com/forums/viewtopic.php?t=3573&

[squeaks]

spud wiki is your friend

[pizlo]

Thank you proffeser i used something like the tut you referred me to and in a day or two when i get it glued, il post pics or something.

[frankrede]

A simple pneumatic is very easy, easier than a combistion(for me atleast).

[noname]

It's cheaper also, because all the reducers from 3 or 4" pipe cost a lot. 4" fittings around here cost usually around 5 bucks or more. For a pneumatic, all you need is an end cap ($.50), pipe ($.50), a ball valve ($3), and a schrader valve ($2.50), if all the sizes are 1/2" PVC. Total cost for a basic, strong, marble gun: about $7.

[frankrede]

even for a sprinkler valve gun with a 2" chamber/1.5" barrel is still cheap.

[iknowmy3tables]

simplest pneumatics are pipe+valve+endcap with a schrader in it all with same size they are weak and ugly but cheap too

[Recruit]

How easy is making a simple Pneumatic? Answer how easy is it to pick your nose?

[rl93]

Very simple