skewer gun will it work

Cannons powered by pneumatic pressure (compressed gas) using a valve or other release.

will it work

yes
2
15%
no
0
No votes
may need some work
5
38%
may need some work
5
38%
give up its hopless you loser
1
8%
 
Total votes: 13
rhys_pesantsrevolt
Private 3
Private 3
Posts: 45
Joined: Wed Jun 13, 2007 4:26 am

im going to design and make a skewer sniper. will it work what mecanisim should i use and also what gun should i design it around. and i a nube so please help :lol:
any design ideas
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26219
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 582 times
Been thanked: 348 times

what kind of skewer?

The problem with a skewer is that it will be unstable and start to tumble the minute it leaves the barrel, you're going to need to make some sort of tail to keep it flying straight.

Other than that a regular pneumatic with a 1/4" barrel and modded sprinkler valve like this one will work nicely

For future reference, note that this is the "showcase" section for finished cannons, this topic belongs in the "discussion" section.

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
rhys_pesantsrevolt
Private 3
Private 3
Posts: 45
Joined: Wed Jun 13, 2007 4:26 am

the skewer is 22cm or if your an american 8 and a half inches long wooden skewers that have small fins on the back that rotate it as it leaves the barrel im hopeing for a range of 50 meters which i don't know what that is in the imperial system. also what should i use spring or air air would be hard i think though. i'll post some blue prints for it in about a week i have started to make the stock. I will test it on palm trees and gum trees. last time i attempted to make one with rubber bands and it miss fired and penetrated 1/4 of an inch into my left arm
User avatar
A-98
Corporal 5
Corporal 5
Posts: 921
Joined: Thu Apr 27, 2006 7:41 pm
Location: Santa Barbara, CA

air would be way easier. just make something roughly like the gun Jack posted.
There are rules, and then there are hundred dollar bills.
User avatar
Flying_Salt
Corporal 3
Corporal 3
Posts: 779
Joined: Mon Oct 09, 2006 4:57 pm
Location: Texas

I'm sorry about the skewer in your arm. Maybe you can join me, I have had a pencil tip in my right hand for over a year.

I'd go with a spring, you can shop around for broken airsoft guns and loot springs from them.
sgort87 wrote: I hereby present Flying_Salt with The one and only <a href="http://www.geocities.com/sgort87/ghetto">Ghetto Award!</a>
rhys_pesantsrevolt
Private 3
Private 3
Posts: 45
Joined: Wed Jun 13, 2007 4:26 am

A-98 problem with air is that it runs out prety fast and that skewers are thin and the air would not cathch them as you may think
rhys_pesantsrevolt
Private 3
Private 3
Posts: 45
Joined: Wed Jun 13, 2007 4:26 am

and flying salt i live in australia gun laws here are tighter than a fishes bum so thats out of the question
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26219
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 582 times
Been thanked: 348 times

I'd go with air, much more power available and mechanically much simpler to make using standard fittings. there are plenty of aussies on this forum who can help you with exactly what parts you should be using and where to get them from.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Modderxtrordanare
Corporal 2
Corporal 2
Posts: 686
Joined: Mon Nov 20, 2006 1:22 pm
Location: Texas

Flying_Salt wrote:I'm sorry about the skewer in your arm. Maybe you can join me, I have had a pencil tip in my right hand for over a year.

I'd go with a spring, you can shop around for broken airsoft guns and loot springs from them.
Paperclip in the eye wins. :wink:
User avatar
TwitchTheAussie
Corporal 5
Corporal 5
Posts: 980
Joined: Tue Feb 06, 2007 3:23 am

rhys_pesantsrevolt wrote:and flying salt i live in australia gun laws here are tighter than a fishes bum so thats out of the question
Do what so many respectable aussies such as myself, Chaos and U2 have done and build a bolt from an arrow and build a pneumatic cannon to go with it.
Raise your horns if you love metal.
spudgunning is like sex, once you've tasted, you can't wait til next time.
-
CpTn_lAw
User avatar
Redcoat
Corporal 4
Corporal 4
Posts: 835
Joined: Tue Feb 13, 2007 1:07 am
Location: Sydney ,Australia
Contact:

yeah rhys just go with air but put a piece of paper around the end of the skewer so it can take as much pressure as possible and also give a nice effect when you fire it and a piece of paper flies out as well.

And why the firetruck weren't you at school today?We were going to lock you in the elevator and send you up to the library level so you get a FRIDAY.

PM me.
Poo.
rhys_pesantsrevolt
Private 3
Private 3
Posts: 45
Joined: Wed Jun 13, 2007 4:26 am

Modderxtrordanare bring it paper clips are fine but have you ever being fired at by ten different people with weapons you've made for them and than got your favorite weapon taken from you and burnt i don't think so i win and imperiator1 will back me up on this one.

twitch tell me how where in australia do you live? i live in NSW.

imperialist im thinking breach loaded 100 psi or higher if i can get to the BWRFS fire extinguishers which go to 200 psi i know insane and they weight about 5 pounds. and have an extendable barrel to make it easier to store and then laser sight i just love them :lol: :lol: :lol: . so you extend the barrel open the breach put skewer with fins in then put a huge clump of cotton wool behind it attach bottle to sniper take out the safety pin and press the release valve should do fine i saw the cotton ball thing on mythbusters they used it when they shout a metal rod through a palm tree and penetrated the piece of ply wood behind it and then it went an inch into a cinder block wall
rhys_pesantsrevolt
Private 3
Private 3
Posts: 45
Joined: Wed Jun 13, 2007 4:26 am

rhys_pesantsrevolt wrote:they used it when they shout a metal rod through a palm tree
the word shout is meant to be shot
User avatar
Flying_Salt
Corporal 3
Corporal 3
Posts: 779
Joined: Mon Oct 09, 2006 4:57 pm
Location: Texas

rhys_pesantsrevolt wrote:and flying salt i live in australia gun laws here are tighter than a fishes bum so thats out of the question
Whoah, fish have bums :shock:
sgort87 wrote: I hereby present Flying_Salt with The one and only <a href="http://www.geocities.com/sgort87/ghetto">Ghetto Award!</a>
User avatar
Modderxtrordanare
Corporal 2
Corporal 2
Posts: 686
Joined: Mon Nov 20, 2006 1:22 pm
Location: Texas

rhys_pesantsrevolt wrote:Modderxtrordanare bring it paper clips are fine but have you ever being fired at by ten different people with weapons you've made for them and than got your favorite weapon taken from you and burnt i don't think so i win and imperiator1 will back me up on this one.
I'm pretty sure having your eye cut open by a paper clip and going to the ER for the whole entire day is alot more painful. I've caught myself on fire too. That's pretty painful aswell.
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post