Difference between revisions of "Lantern sparker"

(Disadvantages)
Line 3: Line 3:
  
 
==Disadvantages==
 
==Disadvantages==
The main disadvantage with lantern sparkers is that they have the tendency to not spark when wet with ANYTHING! Axe, hairspray, and [[starting fluid]] will all stop a lantern sparker from working if they should get on the flint/steel sparking assembly. They are very cheap however, and the flints are replaceable. If you can afford it, a GOOD (usually expensive) [[BBQ ignitor]] or [[stun gun]] is superior.
+
The main disadvantage of lantern sparkers is that they have the tendency to not spark when wet.  AXE, hairspray, and [[starting fluid]] will all stop a lantern sparker from working if they should get on the flint/steel sparking assembly. They are very cheap however, and the flints are replaceable. If you can afford it, a GOOD (usually expensive) [[BBQ ignitor]] or [[stun gun]] is superior.
 
the lantern sparker is mounted through a single hole in the chamber. It protrudes into the chamber, and may therefore be impractical or impossible to use in [[coaxial]] launchers.
 
the lantern sparker is mounted through a single hole in the chamber. It protrudes into the chamber, and may therefore be impractical or impossible to use in [[coaxial]] launchers.
 +
 
[[Category:Ignition sources]]
 
[[Category:Ignition sources]]

Revision as of 00:15, 1 February 2007

Replacement lantern sparker

Lantern sparkers are a method of ignition and are usually cheaper and more arguably reliable than BBQ ignitors or stun guns. They work by spinning a knurled wheel connected to a rod of steel. A piece of flint pressed against a rifled section of the steel by a spring. When the wheel is spun rapidly, pieces of the flint material are

shaved off and ignite spontaneously, causing a shower of sparks that are ideal for igniting a combustion mixture.

Disadvantages

The main disadvantage of lantern sparkers is that they have the tendency to not spark when wet. AXE, hairspray, and starting fluid will all stop a lantern sparker from working if they should get on the flint/steel sparking assembly. They are very cheap however, and the flints are replaceable. If you can afford it, a GOOD (usually expensive) BBQ ignitor or stun gun is superior. the lantern sparker is mounted through a single hole in the chamber. It protrudes into the chamber, and may therefore be impractical or impossible to use in coaxial launchers.