small bore darts(could make them bigger)

[frankrede]

I started saving all my old milk jugs for projects like these/
Well....I tried to make some darts only to find my milk jugs still had a little milk and the smell was horrendous, so I had to toss them

[A-98]

Heres an idea. You could make a mold with like 10 cones equally spaced on it, all the same size. There would need to be holes drilled through the base of what the cones are attached to.
The use a vacuum molding machine to mold the plastic around the mold.
The plastic those things usually use would work very well for these. You could easily make hundreds of those little cones quickly. Some schools have these vacuum molding machines in the tech dept etc.. Just an idea anyway.

ive thought of using one, but i dont know where i can find one. i could make my own i suppose....

[ALIHISGREAT]

i like you inventivve use of lego lol

[beebs111]

i made a few of these, maybe ill post pics of my broadheads. i just hammered the coat hangar wire flat and then ground the flat part down on the woodshop angle grinder in my school.

[potato launcher]

ive done that with nails and electrical tape except it was made for a blow dart gun

[nivekatoz]

use wire nuts for the cones

[Zen///]

Sorry for bumping this up, (Its only been a month since the last person posted)

CAN YOU REALLY HIT A 2" GROUP AT 100 FEET?!?!?!?

It says in your description you did.

[A-98]

Damn straight I can.

Ok, I cheated by mounting my gun, and using exactly the same pressure each time, but, whatever