can u put propane in a Pneumatic cannon instead of air??

[cannon monkey]

ok thanks

hey guys wat do u think of rc helicopters ( i know off topic but my mom wants me to find a new hobby)

[jimmy101]

they way i do it is saw off the top half of the brass torch fitting that comes with it. sand the rough, sharp edges to a smooth surface. push one end of some plastic tubing over it and secure it with a hose clamp. secure the other end (also with a hose clamp) to what ever u want to pressurize. i usually get the tall blue cylinder but the torch fitting should still fit perfectly on the short green one.

You don't have to saw it off. You can use 2 pipe wrenches and unscrew that pipe out of valve unit. ...

Or, don't saw it or unscrew it. Just unscrew the air mixer (the last 2" or so of the torch head). Then use a short piece of pressure hose and a pair of hose clamps.

Advantages;
1. The orifice at the tip of the fuel pipe makes it nearly impossible to get liquid propane into the meter.
2. You can easily reassemble the the torch head and have a working (and safe) Bernzomatic torch.

[Demon]

hey guys wat do u think of rc helicopters

I am sure your mom wont give you
money for that hobby because it's VERY expensive.

(an good rc copter(as my father one) cost 600 $(without talking of crash fee's)).

And it's a lot of pain in your ass to make it(my dad taked 2-3 months and he is an engineer.)

And you probably dont have the skill needed.

[starman]

hey guys wat do u think of rc helicopters ( i know off topic but my mom wants me to find a new hobby)

Mondo expensive if you get into the nice ones. Don't start out with a really nice one...You WILL crash it several times learning how to fly it.

[cannon monkey]

i just got back from the hobby shop a nice SMALL ( bout size of ur mouse pad ) micro mini helicopter is 160 dollars
and it had no tail rotor and 2 of them on the top
it pose to be and easyer to fly good for a first one

i going make a new thread for this so I don't get in trouble.