Modifying a fire extinguisher.

A place for general potato gun questions and discussion.
Post Reply
User avatar
)DEMON(
Sergeant 4
Sergeant 4
Posts: 1391
Joined: Sun Mar 12, 2006 1:22 pm
Location: Johannesburg South Africa

I just bought a 1kg fire extinguisher and have emptied it already,I want to find out if I can turn it into an air source. I am unsure of how it works, this kind is not a chemical reaction kind, it is just the substance with air pressureized above it.That is what I think. Here are some photos of what I have done. I don't know what to do form here and I need help.

Emptying these are fun. :D

Edit, sorry, they are mixed up.I don't know what happend.
Attachments
all the peices.
all the peices.
This is the chamber with some of the powder remaining, it is sealed to the top peice with and o ring.
This is the chamber with some of the powder remaining, it is sealed to the top peice with and o ring.
This is the main part which can be removed with ease from the chamber.
This is the main part which can be removed with ease from the chamber.
fe7.jpg (12.94 KiB) Viewed 4315 times
Sorry the pics are fuzzy, you can see the various bit once you have unscewed the peices.
Sorry the pics are fuzzy, you can see the various bit once you have unscewed the peices.
fe5.jpg (15.23 KiB) Viewed 4315 times
This is the pressure gauge, it is measured in kpa.
This is the pressure gauge, it is measured in kpa.
This is the nozzle, I don't know how the valve works but it might be a chamber sealing piston type valve.
This is the nozzle, I don't know how the valve works but it might be a chamber sealing piston type valve.
I am not sure what these are but I think they lead to the chamber, the one directly seen has a miny piston that only lets substances out.
I am not sure what these are but I think they lead to the chamber, the one directly seen has a miny piston that only lets substances out.
This is empty, I have taken it apart befor so that explains why the pressure gauge is dented.All attachments to this are threaded and can be removed.
This is empty, I have taken it apart befor so that explains why the pressure gauge is dented.All attachments to this are threaded and can be removed.
Forever dreaming...
Top
spudshot
Sergeant
Sergeant
Posts: 1036
Joined: Sun Oct 03, 2004 7:16 am

looks like a DC extinguisher, dump all that shit outta the tank (wear a mask just in case) and then just go from there, i took off the gauge on mine and put on a quick connect for my air compressor, if you're going to use it for an air source i'd tap the nozzle and put a hose on there with a quick connect for filling pneumatics.
Image
Top
User avatar
)DEMON(
Sergeant 4
Sergeant 4
Posts: 1391
Joined: Sun Mar 12, 2006 1:22 pm
Location: Johannesburg South Africa

It is tapped, everything is tapped and threaded.

So I must make sure that the fire extinguisher must be filled through the port where the pressure gauge was?
What about the other side?
I looked at the valve and it is really simple, I will keep it on there.I have also emptied all the crap out of there.
Forever dreaming...
Top
User avatar
Mihlrad
Specialist 4
Specialist 4
Posts: 467
Joined: Tue May 23, 2006 6:45 pm

The substance is dry chemical... basically dry chemical is a chalky powder, completely non toxic, it just makes you feel weird and maybe cough if you breathe it in but its not toxic.
Top
User avatar
)DEMON(
Sergeant 4
Sergeant 4
Posts: 1391
Joined: Sun Mar 12, 2006 1:22 pm
Location: Johannesburg South Africa

Ok, today I am going to buy some stuff for it.
Forever dreaming...
Top
User avatar
LucyInTheSky
Specialist 2
Specialist 2
Posts: 293
Joined: Fri Apr 21, 2006 11:46 am

Thought you might want to see this. Its not mine. It is on
http://www.uksgc.co.uk/forums/index.php?showtopic=75

Image
Image
Top
User avatar
)DEMON(
Sergeant 4
Sergeant 4
Posts: 1391
Joined: Sun Mar 12, 2006 1:22 pm
Location: Johannesburg South Africa

Thanks, I have it figured out now..
Forever dreaming...
Top
User avatar
WOW!!
Corporal 4
Corporal 4
Posts: 891
Joined: Thu Mar 16, 2006 9:47 pm
Location: New jersey

Iall ready made one, it shoots pens, it has a shrader valve and a PSIG, what is the maz psi on a fire exstinugsher? Ill get a pic up soon.
Top
pyrogeek
Specialist 4
Specialist 4
Posts: 457
Joined: Sat May 13, 2006 7:43 pm
Location: moline Illinios

Having the pressure gauge on it would be nice, so what I would do is just add a "T" in between the tank and the valve, and that would be where your air inlet goes.

I modified a fire extenguisher before, one of those old CO2 ones (very heavy) and I just used it for exhausting my combustion after firing it and such crap. I had a quick connect on the outlet where I would connect something for the air to go out, and then I would just connect the air compressor to it and open the valve to repressurize the tank. But, this is a little different than your situation.
Top
User avatar
)DEMON(
Sergeant 4
Sergeant 4
Posts: 1391
Joined: Sun Mar 12, 2006 1:22 pm
Location: Johannesburg South Africa

The threads on this one are irregular so I can't just screw in a fitting. I will have to weld a fitting in.
Forever dreaming...
Top
User avatar
SpudStuff
Sergeant 5
Sergeant 5
Posts: 1410
Joined: Sat Dec 10, 2005 3:55 pm
Location: Cupertino, California
Contact:
Contact SpudStuff

just get the closest fitting. wrap it in teflon. thread it in then run a bead of solder around the rim
Top
Benny
Corporal 4
Corporal 4
Posts: 844
Joined: Wed Apr 19, 2006 8:21 pm
Location: Tasmania, Australia.

Do what spudstuff said, but instead of solder use some jb weld.
Join the spudshot forum!!!!!

F*ck the bunny... i got a fishy ><>
Top
User avatar
Pete Zaria
Corporal 5
Corporal 5
Posts: 954
Joined: Fri Mar 31, 2006 6:04 pm
Location: Near Seattle, WA

Agree w/ Benny. Take it to a hardware store and find whatever fitting goes in it the best, then give it two or three wraps of Teflon tape, thread it in with a wrench, and then JBweld it in (inside and out if possible). That sucker wont' come back out.

I might try this for use with a little cloud bbmg strafer.

Peace,
Pete Zaria.
Top
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Fire extinguisher help
    by Juggernaut12121 » » in Ammo & Materials
    5 Replies
    3195 Views
    Last post by ramses
  • Fire extinguisher
    by K8TOW » » in Ammo & Materials
    2 Replies
    2466 Views
    Last post by Gippeto
  • Fire extinguisher
    by airman » » in Pneumatic Cannons
    21 Replies
    5171 Views
    Last post by dungdue0
  • Fire Extinguisher Help
    by removed » » in Pneumatic Cannons
    12 Replies
    3277 Views
    Last post by Strake
  • Fire Extinguisher gun help
    by Clutch » » in Pneumatic Cannons
    6 Replies
    2484 Views
    Last post by maverik94

Return to “General Cannon Discussion”