What to do!?!?!?

[sputnick]

All the plans only exist on paper, I decided on paper so that I could do the curves of the stock easier. The only plans that I could potentially post is a sort of template for the 3 piece stock, which would not be much good without the actual design of the firing mechanism, which is really nothing special, just imagine 5 inches of 1 1/2 inch horizontal ABS connected to a T piece , connected to a vertical piece about 6-7 inches long (taking the place of the magazine) then at the other horizontal portion of the T piece, a 1/2 inch barrel, which would be covered by the barrel guard on the actual m14, I am going to do a rough paint layout tonight, and maybe provide more details tomorow.

[sputnick]

Here is a simple layout, remember that all pieces of the stock are made up of 3 pieces. The top diagram shows the 2 separate stock partitions, and the bottom shows the pipe layout more clearly.

The last picture is just how the stock will look and cover the pipe.