Diaphragm Setup

[Shrimphead]

Here is the setup I am planning to use for my first diaphragm cannon. Does this look like it will work? I just want to be sure. Also, is there anything I should check before I glue everything up? Thanks.

[SpudStuff]

you should try not to use glue. Get a female adapter and a threaded plug. but other than that the design will work

[Shrimphead]

The blue thing in the picture is a male adapter.

[SpudStuff]

then yes it will work

[Shrimphead]

Anybody else? I really want more than one opinion just to make sure. It's all ready to be glued and I'm pretty sure that I can solve any problems that might come up without spending too much more money. I just want to be positive that there is nothing wrong with it.

[SpudStuff]

nothing wrong with it

[mark.f]

SpudStuff, why dominate the thread??? Post count?

Can you give me some details on this picture? Honestly, you can't really answer anything until you give specific details on pipe sizes, diaphragm material, pilot valve flow, etc.

[SpudStuff]

Shut up mark. i have mad many diaphram valves exactiy like this and they all work. you can use a small or large pilot opening wnd it almost always workd unless you reakky fuck something up

BTY I found a way to get aroung the password on you website

[CS]

"BTY I found a way to get aroung the password on you website" ~SpudStuff

O, what? You want a cookie now? (jk)

[SpudStuff]

no he said it couldn'tn be done

[mark.f]

When did I say that?

P.S. - just for proof, what's the password then???

Back on topic, Shrimphead, what's the specifications on the valve?

EDIT: spelling.

EDIT^2: and I didn't type "Post Count?" in my post. Someone must have edited that in there, (cough cough Pimpmann cough...)

[SpudStuff]

you said it the REAL SPUAh VALVE topic

ask Pimpmanni told him

[mark.f]

Well, even if you did figure out the password... So what? All the pictures have been posted on spudfiles anyway, so their not "secret" anymore.

Once again, proove it. What's the password?

[CS]

Mark, I dont know how in the hell he figured it, but he got it right. Tested it myself.

"EDIT^2: and I didn't type "Post Count?" in my post. Someone must have edited that in there, (cough cough Pimpmann cough...)" ~markfh11q

*Dun-dun-dun-dunnnn*
The Siberian computer hacker, "Muka-loka" strikes again!!! If your confused as a mother f*cker, go <a href="http://www.spudfiles.com/forums/viewtop ... 3">HERE</a>

The password is 001-007. Simple, yet normally hard to guess something so simple.

[Shrimphead]

Specs:
Barrel- 1/2"
Chamber- 2"
The gray is a 2" female adapter
The blue is a 2"-1 1/2" male adapter
The red is a 1 1/2"- 1" bushing
The diaphragm is a piece of 1/8" thick rubber that is used for making gaskets.
The pilot valve is a blowgun.