Chamber Diameter vs Barrel Diameter
- Gun Freak
- Lieutenant 5

- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Ok so me and Clemsonguy are discussing whether a 1.5" gold ball barrel will be choking the flow of a 1.5" chamber. I don't want to downsize the valve because I have all the parts measured out and I don't want to upsize the chamber to 2" because it would be way too big.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- clemsonguy1125
- Sergeant 5

- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
By the way the barrel is 1.5 SDR,
That is all.
- jackssmirkingrevenge
- Five Star General

- Posts: 26219
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 581 times
- Been thanked: 347 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Technician1002
- Captain

- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
In general, the shorter and fatter the chamber is for a given volume, the higher the pressure remains through the shot. On a long skinny chamber, the gas must accelerate to the valve, encounter flow resistance, thus dropping the pressure on the way to the valve. Then high speed flow in the valve produces even more loss.
Higher pressure at the valve puts a higher volume of compressed air from the chamber into the barrel with less loss through the valve. In a short fat chamber the last 1/2 the air charge has a much shorter and lower resistance path to the valve. In a long skinny chamber, the path is long and restrictive.
In a combustion launcher, the shorter chamber has a shorter flame propagation path and less surface area to steal the heat of combustion for a longer lasting pressure spike from combustion. In this regard, a combustion chamber has that additional advantage when fat.
I hope this helps. This is one of the reasons we decided on a short fat chamber for the t shirt competition launcher. GGDT does not model that, but only uses chamber volume in the calculations. I wish it did so we could try to model different chamber configurations.
If this is insignificant and trivial performance changes or fairly major, I have no idea. I have not seen enough modeling on the subject to really know.
This is my 2 cents worth on the subject.
Higher pressure at the valve puts a higher volume of compressed air from the chamber into the barrel with less loss through the valve. In a short fat chamber the last 1/2 the air charge has a much shorter and lower resistance path to the valve. In a long skinny chamber, the path is long and restrictive.
In a combustion launcher, the shorter chamber has a shorter flame propagation path and less surface area to steal the heat of combustion for a longer lasting pressure spike from combustion. In this regard, a combustion chamber has that additional advantage when fat.
I hope this helps. This is one of the reasons we decided on a short fat chamber for the t shirt competition launcher. GGDT does not model that, but only uses chamber volume in the calculations. I wish it did so we could try to model different chamber configurations.
If this is insignificant and trivial performance changes or fairly major, I have no idea. I have not seen enough modeling on the subject to really know.
This is my 2 cents worth on the subject.
- Gun Freak
- Lieutenant 5

- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
So it isn't really worth upping the chamber size to 2" because the performance gain will be minimal...
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 2853 Views
-
Last post by Technician1002
-
- 9 Replies
- 2922 Views
-
Last post by Ragnarok
-
- 2 Replies
- 2378 Views
-
Last post by Pete Zaria
-
- 11 Replies
- 2370 Views
-
Last post by jackssmirkingrevenge
-
- 18 Replies
- 5664 Views
-
Last post by Spudgun on Crack

